shetch Posted March 30, 2019 Share Posted March 30, 2019 General support/feedback for Bootstrap 4 admin See https://apps.oscommerce.com/LCrov&bootstrap-v4-oscommerce-admin-ce Rwe, valquiria23, JcMagpie and 2 others 3 2 Quote Link to comment Share on other sites More sharing options...
♥JcMagpie Posted March 30, 2019 Share Posted March 30, 2019 Not used it in anger yet but looks good. Thanks. valquiria23 and shetch 2 Quote Link to comment Share on other sites More sharing options...
♥JcMagpie Posted March 30, 2019 Share Posted March 30, 2019 Gone over most of this and it works like a charm. Was easy to install simply follow instructions and should have no issues. I simply copied ove my old config and .htaccess files and was able to log into new admin. I kept it simple by renaming my old admin and naming the new one the same as the old so no config changes needed. Not going to post link to admin! so here is a short view of what the new admin looks like. I would recomend taking a look and using it. Oh and you can show your appreciation for the work done by simon by looking at the bottom of his text in the app's market 😊 buy him a beer or 2. Thank's Simon valquiria23, Smoky Barnable and shetch 3 Quote Link to comment Share on other sites More sharing options...
René H4 Posted March 30, 2019 Share Posted March 30, 2019 This looks extremly well! If I was running BS4 I would install it.🤔 Quote Link to comment Share on other sites More sharing options...
♥JcMagpie Posted March 30, 2019 Share Posted March 30, 2019 (edited) 57 minutes ago, René H4 said: If I was running BS4 🤔 Admin has nothing to do with what you are running in the shop side! As long as you are running CE you should be able to use the BS4 admin. The question will be are you using stock admin or not. Edited March 30, 2019 by JcMagpie valquiria23 1 Quote Link to comment Share on other sites More sharing options...
René H4 Posted March 30, 2019 Share Posted March 30, 2019 OK, in that case I will setup a test environment and copy my shop to it. Then install this Add-On. But I am in-season at the moment, so this may take a while......;-) Quote Link to comment Share on other sites More sharing options...
burt Posted March 30, 2019 Share Posted March 30, 2019 (edited) 1 hour ago, René H4 said: OK, in that case I will setup a test environment and copy my shop to it. Then install this Add-On. But I am in-season at the moment, so this may take a while......;-) IIRC you already have Henrys bootstrapped Admin ... on the live shop (so it might be a little more difficult for you to swap over)... Edited March 30, 2019 by burt Quote Link to comment Share on other sites More sharing options...
René H4 Posted March 30, 2019 Share Posted March 30, 2019 Thanks Gary, I was afraid of this.... 🙂 Quote Link to comment Share on other sites More sharing options...
burt Posted March 30, 2019 Share Posted March 30, 2019 You could give it a go by doing as suggested above by jcmagpie => a new admin folder to run alongside your real admin. valquiria23 and shetch 2 Quote Link to comment Share on other sites More sharing options...
radhavallabh Posted March 31, 2019 Share Posted March 31, 2019 Hi, will this work with the Frozen version CE bootstrap 3? Quote Link to comment Share on other sites More sharing options...
shetch Posted March 31, 2019 Author Share Posted March 31, 2019 I would advise you to upload to a new folder so you can try it, simply copy your existing admin/includes/configure.php over and change paths. You can then run both admins to test. valquiria23 1 Quote Link to comment Share on other sites More sharing options...
Fredi Posted April 3, 2019 Share Posted April 3, 2019 (edited) Great addon! Thanks. Looks modern, easy to use. This is a basic modification for the future adaptive full version of the store. Problem for stores that use Article Manager, information pages, support ticket, news, FAQ and etc. Need an adaptation of the modules, or the method of how to do it yourself. This is a very big job. But the result is a transition to a new level. I tried it, but I had to go back to the old version because of the modules that are installed. Self-modification such as Article Manager was unsuccessful. Unfortunately I am not a programmer and for me it is very difficult. Edited April 3, 2019 by Fredi Quote Support forum for osCommerce in russian language - from Ashkelon. Support since 2002.Best regards, Fredi Link to comment Share on other sites More sharing options...
mcmannehan Posted April 4, 2019 Share Posted April 4, 2019 Great new modern admin nice work, but i find an issue: this (line 20): $low_query = tep_db_query("select distinct p.products_id, pd.products_name, p.products_quantity from products p, products_description pd where p.products_id = pd.products_id and p.products_quantity < '" . (int)$low_amount . "' and p.products_quantity <> '0' order by p.products_quantity"); // with that and p.products_quantity <> '0' you get also the minus quantity. have to change to: $low_query = tep_db_query("select distinct p.products_id, pd.products_name, p.products_quantity from products p, products_description pd where p.products_id = pd.products_id and p.products_quantity < '" . (int)$low_amount . "' and p.products_quantity > '0' order by p.products_quantity"); // with p.products_quantity > '0' you get only the range about STOCK_REORDER_LEVEL! and this (line25): $out_query = tep_db_query("select distinct p.products_id, pd.products_name, p.products_quantity from products p, products_description pd where p.products_id = pd.products_id and p.products_quantity = '0' order by p.products_quantity"); //with p.products_quantity = '0' you don't get the minus quantity have to change to: $out_query = tep_db_query("select distinct p.products_id, pd.products_name, p.products_quantity from products p, products_description pd where p.products_id = pd.products_id and p.products_quantity <= '0' order by p.products_quantity"); // with p.products_quantity <= '0' you get the minus quantity And what's the reason to do in line 19 that: $low_amount = STOCK_REORDER_LEVEL + 1; To check STOCK_REORDER_LEVEL > 0 the resolution should be different. Quote The clever one learn from everything and from everybody The normal one learn from his experience The silly one knows everything better [socrates, 412 before Christ] Computers help us with the problems we wouldn't have without them! 99.9% of the bugs sit in front of the computer! My programmed add-ons: WDW EasyTabs 1.0.3, WDW Facebook Like 1.0.0 if(isset($this) || !isset($this)){ // that's the question... Link to comment Share on other sites More sharing options...
shetch Posted April 5, 2019 Author Share Posted April 5, 2019 On 4/4/2019 at 12:17 AM, Fredi said: Great addon! Thanks. Looks modern, easy to use. This is a basic modification for the future adaptive full version of the store. Problem for stores that use Article Manager, information pages, support ticket, news, FAQ and etc. Need an adaptation of the modules, or the method of how to do it yourself. This is a very big job. But the result is a transition to a new level. I tried it, but I had to go back to the old version because of the modules that are installed. Self-modification such as Article Manager was unsuccessful. Unfortunately I am not a programmer and for me it is very difficult. Thanks, this a designed to work the quoted version of BS, not the official release. It is obviously not practical for me to upgrade every available addon but will probably make an effort to do the more common at some stage. I will also look at feasibility of instructions. valquiria23 1 Quote Link to comment Share on other sites More sharing options...
shetch Posted April 5, 2019 Author Share Posted April 5, 2019 On 4/4/2019 at 5:35 AM, mcmannehan said: Great new modern admin nice work, but i find an issue: this (line 20): $low_query = tep_db_query("select distinct p.products_id, pd.products_name, p.products_quantity from products p, products_description pd where p.products_id = pd.products_id and p.products_quantity < '" . (int)$low_amount . "' and p.products_quantity <> '0' order by p.products_quantity"); // with that and p.products_quantity <> '0' you get also the minus quantity. have to change to: $low_query = tep_db_query("select distinct p.products_id, pd.products_name, p.products_quantity from products p, products_description pd where p.products_id = pd.products_id and p.products_quantity < '" . (int)$low_amount . "' and p.products_quantity > '0' order by p.products_quantity"); // with p.products_quantity > '0' you get only the range about STOCK_REORDER_LEVEL! and this (line25): $out_query = tep_db_query("select distinct p.products_id, pd.products_name, p.products_quantity from products p, products_description pd where p.products_id = pd.products_id and p.products_quantity = '0' order by p.products_quantity"); //with p.products_quantity = '0' you don't get the minus quantity have to change to: $out_query = tep_db_query("select distinct p.products_id, pd.products_name, p.products_quantity from products p, products_description pd where p.products_id = pd.products_id and p.products_quantity <= '0' order by p.products_quantity"); // with p.products_quantity <= '0' you get the minus quantity And what's the reason to do in line 19 that: $low_amount = STOCK_REORDER_LEVEL + 1; To check STOCK_REORDER_LEVEL > 0 the resolution should be different. Thanks for letting me know, I will update master copy for later releases. I think the code in line 19 was intended to warn just before STOCk_REORDER_LEVEL was reached valquiria23 1 Quote Link to comment Share on other sites More sharing options...
Fredi Posted April 5, 2019 Share Posted April 5, 2019 The administrator has not changed since almost his birth. The community needs to decide which format of the Site Administrator should be taken as a modern basic framework - as the official version of the osCommerce BS, HTML5, PHP-7, supported by the community. There is another good version of the administration panel available developed by SoloMono. We all have to make a decision together. And based on this, adapt existing modules to the generally accepted format. No need to spray power on many different versions. Let's choose one and develop it together. We need to combine our strength, knowledge and experience. We need to remember how we started this almost 20 years ago. This will be the reanimation of osCommerce and our common success. cigarsforless and Solomono 1 1 Quote Support forum for osCommerce in russian language - from Ashkelon. Support since 2002.Best regards, Fredi Link to comment Share on other sites More sharing options...
shetch Posted April 5, 2019 Author Share Posted April 5, 2019 (edited) 4 hours ago, Fredi said: The administrator has not changed since almost his birth. The community needs to decide which format of the Site Administrator should be taken as a modern basic framework - as the official version of the osCommerce BS, HTML5, PHP-7, supported by the community. There is another good version of the administration panel available developed by SoloMono. We all have to make a decision together. And based on this, adapt existing modules to the generally accepted format. No need to spray power on many different versions. Let's choose one and develop it together. We need to combine our strength, knowledge and experience. We need to remember how we started this almost 20 years ago. This will be the reanimation of osCommerce and our common success. I agree there should be focus on only one version of front and backend, but I'm afraid oscommerce cannot move forward until the official release becomes one of the same, and the oscommerce site itself is modernised. It has to compete with opencart, prestashop & magento to name but a few and to be frank, it has no chance in it's current form. For example, cpanel quick installers install the outdated official release, so why would people use it in preference to the competitors? Please send a link to the SoloMono version Edited April 5, 2019 by shetch Additional information Quote Link to comment Share on other sites More sharing options...
Fredi Posted April 5, 2019 Share Posted April 5, 2019 https://solomono.net/ Bazet in osCommerce Quote Support forum for osCommerce in russian language - from Ashkelon. Support since 2002.Best regards, Fredi Link to comment Share on other sites More sharing options...
shetch Posted April 5, 2019 Author Share Posted April 5, 2019 42 minutes ago, Fredi said: https://solomono.net/ Bazet in osCommerce That doesn't look like a community version Quote Link to comment Share on other sites More sharing options...
LeeFoster Posted April 6, 2019 Share Posted April 6, 2019 I have this installed but when I try to change the pages that the HT Datepicker shows on it just removes all pages. Quote Link to comment Share on other sites More sharing options...
♥JcMagpie Posted April 7, 2019 Share Posted April 7, 2019 Also Table Row Click jQuery Grid List Javascript (jQuery) looks like any one using the select files is failing to store files selection when edited. Uninstalling the module and reinstalling it brings back the default pages but only untill you try to edit and they are lost again. before edit after edit valquiria23 1 Quote Link to comment Share on other sites More sharing options...
♥JcMagpie Posted April 7, 2019 Share Posted April 7, 2019 layout issue is fixed by adding css, simply make a user.css for admin and add link to admin/includes/template_top.php .form-check-input { margin-left: -2.25rem !important; } The page issue is with the save button, editing and cancel works fine it's only when you try and save an edit that it fails. valquiria23 1 Quote Link to comment Share on other sites More sharing options...
LeeFoster Posted April 7, 2019 Share Posted April 7, 2019 2 hours ago, JcMagpie said: Also Table Row Click jQuery Grid List Javascript (jQuery) looks like any one using the select files is failing to store files selection when edited. Uninstalling the module and reinstalling it brings back the default pages but only untill you try to edit and they are lost again. before edit after edit Yeah that's the exact issue I am having. Quote Link to comment Share on other sites More sharing options...
♥JcMagpie Posted April 7, 2019 Share Posted April 7, 2019 Yes the configuration table is not beeing updated properly! every time I edit and check the table, MODULE_HEADER_TAGS_DATEPICKER_JQUERY_PAGES is missing from the table. Not found the cause yet . valquiria23 1 Quote Link to comment Share on other sites More sharing options...
shetch Posted April 7, 2019 Author Share Posted April 7, 2019 5 hours ago, JcMagpie said: Also Table Row Click jQuery Grid List Javascript (jQuery) looks like any one using the select files is failing to store files selection when edited. Uninstalling the module and reinstalling it brings back the default pages but only untill you try to edit and they are lost again. before edit after edit This is caused by the jquery reference, to fix simply move the jquery script link (assets/js/jquery.min.js) in admin/includes/template_bottom.php to admin/includes/template_top.php (below the css links). Please find attached ht_grid_list_view.php with adjusted bootstrap checkbox fix. (so to avoid the css hack) Any other module using jquery should also now be ok but keep me informed ht_grid_list_view.zip valquiria23 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.