ralgiere Posted March 7, 2017 Share Posted March 7, 2017 First of all I hope I am posting this in the correct place.I am not a programmer but someone that has a desire. I am almost too embarrassed to ask but I need help. I added the Multi-Vendor shipping add-on to my web site and now the checkout_shipping.php is blank. I looked first on this site before I bothered anyone but could not find what I am looking for. Could someone PLEASE help me get my web site back to where i can sell items? Thank so much for any help I can get. Ray Link to comment Share on other sites More sharing options...
FIMBLE Posted March 7, 2017 Share Posted March 7, 2017 If the page is blank its pretty likely your host has supressed errors. See if you have an error log text file which will give you a heads up on what the errror could be. Nic Sometimes you're the dog and sometimes the lamp post [/url] My Contributions Link to comment Share on other sites More sharing options...
MrPhil Posted March 7, 2017 Share Posted March 7, 2017 Did you manually install the add-on, or use the Package Manager? Either way, you should be able to back out the add-on installation and at least get back to selling. Hopefully an uninstall will work... if not, you did back up your store before installing the add-on, right? Before installing the add-on, did you confirm that it says it is safe for use on your particular osC version? Sometimes older add-ons will break newer osC versions. If it does not list your osC version as compatible, I would have someone look at the add-on code to see if it will probably be a problem. Note that sometimes the add-on's author simply has not gotten around to updating the compatibility list for a while. It sounds in your case like either the add-on is incompatible, or there was a mistake while installing it and your resulting PHP code is bad. By the way, if you're just starting out with osC, the current version that should be installed is osC 2.3.4BS Edge. It's the only up-to-date version offered. The official osC 2.3.4 is 3 years old and doesn't run on current PHP versions. Link to comment Share on other sites More sharing options...
♥kymation Posted March 7, 2017 Share Posted March 7, 2017 One additional note: The MVS addon has its own support thread. Posting there is more likely to get you the proper support. Regards Jim See my profile for a list of my addons and ways to get support. Link to comment Share on other sites More sharing options...
ralgiere Posted December 12, 2017 Author Share Posted December 12, 2017 I have tried to install the Multi-Vendor shipping add-on without any success. I have started all over with a new install of OSCommerce Online Merchant v2.3.4. Could someone PLEASE send me a link to the Multi-Vendor shipping add-on that works with OSCommerce Online Merchant v2.3.4 and detailed instructions on how to add it to V2.3.4 Link to comment Share on other sites More sharing options...
♥kymation Posted December 13, 2017 Share Posted December 13, 2017 @ralgiere Please don't make the same post in multiple threads. Also, if you want help on an Addon, posting in that Addon's support thread will usually get the best result. Regards Jim See my profile for a list of my addons and ways to get support. Link to comment Share on other sites More sharing options...
ralgiere Posted December 13, 2017 Author Share Posted December 13, 2017 I am very sorry, I am not a forum expert. I am just a person looking for help. Link to comment Share on other sites More sharing options...
MrPhil Posted December 13, 2017 Share Posted December 13, 2017 " new install of OSCommerce Online Merchant v2.3.4 " -- that's a mistake. Do not install osC 2.3.4 -- it's several years old and quite out of date. 2.3.4.1 (now available on this site's downloads section) is more up to date, and the Community version (2.3.4BS Edge, installed from GitHub) is much better, including being Responsive (vital for anyone shopping on a phone). Short story: don't install 2.3.4 for a new store. Go with Edge, unless MVS is vital to you, but will not work with it and you have to use 2.3.4.1 instead. That may not be documented anywhere, and you may just have to try it. If you get a blank screen (White Screen Of Death), that means that something corrupted the PHP file during the installation, and you have a fatal PHP error. You might find an error log (literally, an "error_log" file on my system) that explains what happened, you might find some partial code (or error messages) output to the browser (use the View Source to see if there's anything), or there might be some other error log page available to you. I think the first thing to do, before spending a lot of time on this, is to confirm that MVS is supposed to work with your base version of osC. It's possible that it's intended for an earlier version, and simply won't work on 2.3.4 or later. Try a careful re-install of osC (make sure it's working) and then try installing MVS again. Look at its "manual install" instructions and consider doing a manual update of your store, following the instructions. You may discover what the problem is and be able to work around it, but this will require PHP programming skills. Link to comment Share on other sites More sharing options...
ralgiere Posted December 24, 2017 Author Share Posted December 24, 2017 good morning Phil, I don't know where to ask for help after installing MVS and don't want to get in trouble again. I am getting an error message after setting up the MVS (Error: You have not selected a shipping method for all groups of products. Please select one shipping method for each group of products below) Can you PLEASE help me or point me to where I can get help? Link to comment Share on other sites More sharing options...
♥kymation Posted December 24, 2017 Share Posted December 24, 2017 Your problem is that your UPSXML module is not set up properly. You need to get a valid Web Access code from UPS and put that in the module's Admin section. That error message should then go away. If you just want to test osCommerce, disable the UPSXML module and use one of the stock osCommerce modules instead. You can always switch to the module you want to use with your live store when you get all of the access codes etc. Regards Jim See my profile for a list of my addons and ways to get support. Link to comment Share on other sites More sharing options...
ralgiere Posted December 27, 2017 Author Share Posted December 27, 2017 I hope everyone had a great Christmas. Well I setup the shipping and it still does not work. I have what looks like a button says (please select) that does not do a thing, should I be able to click on it and select what shipping I want? Also I set up a test account for California that has a tax and the tax does not show up. Could someone help me? Link to comment Share on other sites More sharing options...
♥kymation Posted December 27, 2017 Share Posted December 27, 2017 There is something wrong with the setup for both of your UPSXML modules. I can't tell what that error is without more information, but chances are it is the same for both. I recommend that you turn off your UPSXML modules and use the standard modules to verify that MVS is working correctly. Once you have that working, turn on one of the UPSXML modules and get that to work before tackling the second. It's a lot easier that way. MVS has nothing to do with taxes, so you need to post a question in the general forum about that. Regards Jim See my profile for a list of my addons and ways to get support. Link to comment Share on other sites More sharing options...
ralgiere Posted December 28, 2017 Author Share Posted December 28, 2017 new errors Link to comment Share on other sites More sharing options...
ralgiere Posted December 28, 2017 Author Share Posted December 28, 2017 This is the USPScode. usps.php Link to comment Share on other sites More sharing options...
♥kymation Posted December 28, 2017 Share Posted December 28, 2017 Try uninstalling the USPS module in every vendor that you have it installed in. I have no idea if that is the current version of that module. Where did you get it? Regards Jim See my profile for a list of my addons and ways to get support. Link to comment Share on other sites More sharing options...
MrPhil Posted December 28, 2017 Share Posted December 28, 2017 The first thing to try to fix is "Couldn't find constant MODULE_SHIPPING_USPS_USERID_1" in .../usps.php. usps.php is expecting someone to have defined a constant name MODULE_SHIPPING_USPS_USERID_1 somewhere, so it sounds like your install did not go well. Is this still the standard osC 2.3.4 you're using? Any add-ons that you installed specify that they are compatible with osC 2.3.4? Sometimes these defines are expected to be inserted into the database during the add-on installation -- you didn't ignore any warnings about DB problems, did you? Link to comment Share on other sites More sharing options...
ralgiere Posted February 16, 2018 Author Share Posted February 16, 2018 Sorry everyone, I just had to walk away from this for a while and almost took down my site. I just don’t have the expertise to figuer out the problem and I am willing to pay someone to fix the problem. When coming back I just noticed on the error code it talks about USPS. I am trying to get my MVS to use UPS. Does anyone have any suggestion and can help me? Link to comment Share on other sites More sharing options...
♥kymation Posted February 16, 2018 Share Posted February 16, 2018 You are having errors in catalog/includes/modules/vendors_shipping/usps.php. If you are not going to use USPS for any of your vendors, just delete that file from your server. We can figure out later why that file isn't working. Regards Jim See my profile for a list of my addons and ways to get support. Link to comment Share on other sites More sharing options...
ralgiere Posted February 16, 2018 Author Share Posted February 16, 2018 Jim, I can't thank you enough for replying, I will go into catalog/includes/modules/vendors_shipping and remove (usps.php) from the server. I have a question. The reason I am trying to get this installed is because I have many suppliers that ship from different states and I have to charge my customers a shipping fee from each vender will this allow me to do this? Link to comment Share on other sites More sharing options...
ralgiere Posted February 16, 2018 Author Share Posted February 16, 2018 I removed the USPS from server and got this error message: Warning: include(includes/modules/vendors_shipping/usps.php): failed to open stream: No such file or directory in C:\xampp\htdocs\socalcoralreef.com\catalog\includes\classes\vendor_shipping.php on line 70Warning: include(): Failed opening 'includes/modules/vendors_shipping/usps.php' for inclusion (include_path='C:\xampp\php\PEAR') in C:\xampp\htdocs\socalcoralreef.com\catalog\includes\classes\vendor_shipping.php on line 70Fatal error: Class 'usps' not found in C:\xampp\htdocs\socalcoralreef.com\catalog\includes\classes\vendor_shipping.php on line 72 Note: do I need to install a ups add on? vendor_shipping.php Link to comment Share on other sites More sharing options...
♥kymation Posted February 16, 2018 Share Posted February 16, 2018 Did you have the USPS module installed? If you did, put the file back and uninstall it (check all vendors), then remove the file. There is a upsxml.php file in the MVS release. Use that one for UPS. It's an older version but will still work. Yes, you can set a flat fee for each vendor, or most shipping modules will let you set a fee in that module. Regards Jim See my profile for a list of my addons and ways to get support. Link to comment Share on other sites More sharing options...
ralgiere Posted February 17, 2018 Author Share Posted February 17, 2018 yes it was uninstalled from all vendors and then removed. I changed them to upsxml and this is what I get Link to comment Share on other sites More sharing options...
♥kymation Posted February 17, 2018 Share Posted February 17, 2018 For your first vendor, you do not have a UPS Access License number. You can apply for one on their website. This takes a few days, so call them if you need one in a hurry. For the second vendor, you appear to be using the old UPS module and not the UPSXML module. The old interface this module uses is no longer supported by UPS. You need to uninstall this module and install the UPSXML module for that vendor. You can use the same Access License number you used for the first vendor. Regards Jim See my profile for a list of my addons and ways to get support. Link to comment Share on other sites More sharing options...
ralgiere Posted February 17, 2018 Author Share Posted February 17, 2018 Thank you so much for all your help it seems to be working. The only thing is that the tax is not showing up for each product Link to comment Share on other sites More sharing options...
♥kymation Posted February 17, 2018 Share Posted February 17, 2018 Tax is not shewing up where? The checkout process normally shows the tax for the entire order, not individual items. Sorry, but I'm too sick right now to take a look at this. Regards Jim See my profile for a list of my addons and ways to get support. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.