FabioW Posted September 1, 2011 Share Posted September 1, 2011 Hi, can some one tell me how to fix this error? Parse error: syntax error, unexpected T_CONSTANT_ENCAPSED_STRING, expecting ',' or ';' in C:\wamp\www\admin\products_attributes.php on line 290 Quote Link to comment Share on other sites More sharing options...
nouveau9 Posted September 5, 2011 Share Posted September 5, 2011 Well today I looked at the code again and I found the errors and I corrected them. I do have another question. On the stock report table in the prodects info page, how would I have it tell the stock when less than 10 or less are available, and have it say "more than 10 available" when there are more than 10 in stock. This is actually like what ebay does. - Luc This is what it looks like now: http://www.jumbledfun.com/onstock.jpg Hello, I have the same error, can you tell me where is(are) the error(s) ? Thank you. Quote Link to comment Share on other sites More sharing options...
velvetpixel Posted September 16, 2011 Share Posted September 16, 2011 It's all fine now. I figured out how to do this my self. I just had to use an if statement. - Luc Could you please post the changes you made to correct the unexpected T_CONSTANT_ENCAPSED_STRING, expecting ',' or ';' error? Quote osCommerce 2.3.1 Add-Ons Installed Header Tags SEO Ultimate SEO URLs Google Sitemap SEO Easy Populate QT Pro Margin Report AJAX Attribute Manager Smart Columns CKEditor OSCThumb Select Product Image Directory Category CSS Menu Enable Disable Categories Contact Form Captcha Link to comment Share on other sites More sharing options...
velvetpixel Posted September 16, 2011 Share Posted September 16, 2011 The problem line in admin/products_attributes.php is: $option_name = tep_db_query("select products_options_name from " . TABLE_PRODUCTS_OPTIONS . " where products_options_id = '" . $options_values['products_options_id'] . "' and language_id = '" . $languages[$i]['id'] . "'"); And did not cause errors before QT Pro was installed. Quote osCommerce 2.3.1 Add-Ons Installed Header Tags SEO Ultimate SEO URLs Google Sitemap SEO Easy Populate QT Pro Margin Report AJAX Attribute Manager Smart Columns CKEditor OSCThumb Select Product Image Directory Category CSS Menu Enable Disable Categories Contact Form Captcha Link to comment Share on other sites More sharing options...
velvetpixel Posted September 16, 2011 Share Posted September 16, 2011 In the QT Pro 4.6.1 install instructions for the admin/product_attributes.php file there is a warning that says Warning: Some people may find that some of the echo's are "bugged".If it is, go into the old file, and find what should come after the corresponding echo's in the new file. Paste that code after the echo. Which echos? There are many in that file and some are form related. Quote osCommerce 2.3.1 Add-Ons Installed Header Tags SEO Ultimate SEO URLs Google Sitemap SEO Easy Populate QT Pro Margin Report AJAX Attribute Manager Smart Columns CKEditor OSCThumb Select Product Image Directory Category CSS Menu Enable Disable Categories Contact Form Captcha Link to comment Share on other sites More sharing options...
SagarJ Posted September 17, 2011 Share Posted September 17, 2011 Could you please post the changes you made to correct the unexpected T_CONSTANT_ENCAPSED_STRING, expecting ',' or ';' error? Please - I have the same error and clueless on how to resolve it. Quote Link to comment Share on other sites More sharing options...
SagarJ Posted September 17, 2011 Share Posted September 17, 2011 Hi All, I found the root cause of the error - "unexpected T_CONSTANT_ENCAPSED_STRING, expecting ',' or ';' error?" on line 290. Its solution is mentioned in the file - Manual_for_2.3.1.html, which has the step by step instructions. A bit of clarity is required, though. For manual step 11.3, the section that mentions : Find: <!-- options //--> to <!-- options eof //--> Change all between to: In the code given to be replaced, there are 4 unfinished "echo" statements (with no code immediately following the '). The statements are just displayed as follows: echo ' The instruction in the manual states to add the code from your existing "admin/products_attributes.php" file to complete each of the corresponding echo statements. In my case, I was using the vanilla products_attributes.php which came default with the OSC 2.3.1 install. I have replaced the echo statements accordingly and the code works! If you simply copy the code from step 11.3 into notepad, the unfinished echo ' statements are on Line 119, 138, 175, & 190. The complete code for step 11.3 which worked for me is given below: ----------------------------------------- <!-- options //--> <?php if ($action == 'delete_product_option') { // delete product option $options = tep_db_query("select products_options_id, products_options_name from " . TABLE_PRODUCTS_OPTIONS . " where products_options_id = '" . (int)$HTTP_GET_VARS['option_id'] . "' and language_id = '" . (int)$languages_id . "'"); $options_values = tep_db_fetch_array($options); ?> <tr> <td class="pageHeading"> <?php echo $options_values['products_options_name']; ?> </td> </tr> <tr> <td><table border="0" width="100%" cellspacing="0" cellpadding="2"> <tr> <td colspan="3"><?php echo tep_black_line(); ?></td> </tr> <?php $products = tep_db_query("select p.products_id, pd.products_name, pov.products_options_values_name from " . TABLE_PRODUCTS . " p, " . TABLE_PRODUCTS_OPTIONS_VALUES . " pov, " . TABLE_PRODUCTS_ATTRIBUTES . " pa, " . TABLE_PRODUCTS_DESCRIPTION . " pd where pd.products_id = p.products_id and pov.language_id = '" . (int)$languages_id . "' and pd.language_id = '" . (int)$languages_id . "' and pa.products_id = p.products_id and pa.options_id='" . (int)$HTTP_GET_VARS['option_id'] . "' and pov.products_options_values_id = pa.options_values_id order by pd.products_name"); if (tep_db_num_rows($products)) { ?> <tr class="dataTableHeadingRow"> <td class="dataTableHeadingContent" align="center"> <?php echo TABLE_HEADING_ID; ?> </td> <td class="dataTableHeadingContent"> <?php echo TABLE_HEADING_PRODUCT; ?> </td> <td class="dataTableHeadingContent"> <?php echo TABLE_HEADING_OPT_VALUE; ?> </td> </tr> <tr> <td colspan="3"><?php echo tep_black_line(); ?></td> </tr> <?php $rows = 0; while ($products_values = tep_db_fetch_array($products)) { $rows++; ?> <tr class="<?php echo (floor($rows/2) == ($rows/2) ? 'attributes-even' : 'attributes-odd'); ?>"> <td align="center" class="smallText"> <?php echo $products_values['products_id']; ?> </td> <td class="smallText"> <?php echo $products_values['products_name']; ?> </td> <td class="smallText"> <?php echo $products_values['products_options_values_name']; ?> </td> </tr> <?php } ?> <tr> <td colspan="3"><?php echo tep_black_line(); ?></td> </tr> <tr> <td colspan="3" class="main"><br><?php echo TEXT_WARNING_OF_DELETE; ?></td> </tr> <tr> <td align="right" colspan="3" class="main"><br><?php echo '<a href="' . tep_href_link(FILENAME_PRODUCTS_ATTRIBUTES, $page_info, 'NONSSL') . '">'; ?><?php echo tep_image_button('button_cancel.gif', ' cancel '); ?></a> </td> </tr> <?php } else { ?> <tr> <td class="main" colspan="3"><br><?php echo TEXT_OK_TO_DELETE; ?></td> </tr> <tr> <td class="main" align="right" colspan="3"><br><?php echo '<a href="' . tep_href_link(FILENAME_PRODUCTS_ATTRIBUTES, 'action=delete_option&option_id=' . $HTTP_GET_VARS['option_id'] . '&' . $page_info, 'NONSSL') . '">'; ?><?php echo tep_image_button('button_delete.gif', ' delete '); ?></a> <?php echo '<a href="' . tep_href_link(FILENAME_PRODUCTS_ATTRIBUTES, $page_info, 'NONSSL') . '">'; ?><?php echo tep_image_button('button_cancel.gif', ' cancel '); ?></a> </td> </tr> <?php } ?> </table></td> </tr> <?php } else { ?> <tr> <td colspan="3" class="pageHeading"> <?php echo HEADING_TITLE_OPT; ?> </td> </tr> <tr> <td colspan="3" class="smallText" align="right"> <?php $options = "select * from " . TABLE_PRODUCTS_OPTIONS . " where language_id = '" . (int)$languages_id . "' order by products_options_id"; $options_split = new splitPageResults($option_page, MAX_ROW_LISTS_OPTIONS, $options, $options_query_numrows); echo $options_split->display_links($options_query_numrows, MAX_ROW_LISTS_OPTIONS, MAX_DISPLAY_PAGE_LINKS, $option_page, 'value_page=' . $value_page . '&attribute_page=' . $attribute_page, 'option_page'); ?> </td> </tr> <tr> <?php //++++ QT Pro: Begin Changed code ?> <td colspan="4"><?php echo tep_black_line(); ?></td> <?php //++++ QT Pro: End Changed Code ?> </tr> <tr class="dataTableHeadingRow"> <td class="dataTableHeadingContent"> <?php echo TABLE_HEADING_ID; ?> </td> <td class="dataTableHeadingContent"> <?php echo TABLE_HEADING_OPT_NAME; ?> </td> <?php //++++ QT Pro: Begin Changed code ?> <td class="dataTableHeadingContent"> <?php echo TABLE_HEADING_TRACK_STOCK; ?> </td> <?php //++++ QT Pro: End Changed Code ?> <td class="dataTableHeadingContent" align="center"> <?php echo TABLE_HEADING_ACTION; ?> </td> </tr> <tr> <?php //++++ QT Pro: Begin Changed code ?> <td colspan="4"><?php echo tep_black_line(); ?></td> <?php //++++ QT Pro: End Changed Code ?> </tr> <?php $next_id = 1; $rows = 0; $options = tep_db_query($options); while ($options_values = tep_db_fetch_array($options)) { $rows++; ?> <tr class="<?php echo (floor($rows/2) == ($rows/2) ? 'attributes-even' : 'attributes-odd'); ?>"> <?php if (($action == 'update_option') && ($HTTP_GET_VARS['option_id'] == $options_values['products_options_id'])) { echo '<form name="option" action="' . tep_href_link(FILENAME_PRODUCTS_ATTRIBUTES, 'action=update_option_name&' . $page_info, 'NONSSL') . '" method="post">'; $inputs = ''; for ($i = 0, $n = sizeof($languages); $i < $n; $i ++) { $option_name = tep_db_query("select products_options_name from " . TABLE_PRODUCTS_OPTIONS . " where products_options_id = '" . $options_values['products_options_id'] . "' and language_id = '" . $languages[$i]['id'] . "'"); $option_name = tep_db_fetch_array($option_name); $inputs .= $languages[$i]['code'] . ': <input type="text" name="option_name[' . $languages[$i]['id'] . ']" size="20" value="' . $option_name['products_options_name'] . '"> <br>'; } ?> <td align="center" class="smallText"> <?php echo $options_values['products_options_id']; ?><input type="hidden" name="option_id" value="<?php echo $options_values['products_options_id']; ?>"> </td> <td class="smallText"><?php echo $inputs; ?></td> <?php //++++ QT Pro: Begin Changed code ?> <td align="center" class="smallText"><input type=checkbox name=track_stock <?php echo $options_values['products_options_track_stock']?"checked":""; ?>></td> <?php //++++ QT Pro: End Changed Code ?> <td align="center" class="smallText"> <?php echo tep_image_submit('button_update.gif', IMAGE_UPDATE); ?> <?php echo '<a href="' . tep_href_link(FILENAME_PRODUCTS_ATTRIBUTES, $page_info, 'NONSSL') . '">'; ?><?php echo tep_image_button('button_cancel.gif', IMAGE_CANCEL); ?></a> </td> <?php echo '</form>' . "\n"; } else { ?> <td align="center" class="smallText"> <?php echo $options_values["products_options_id"]; ?> </td> <td class="smallText"> <?php echo $options_values["products_options_name"]; ?> </td> <?php //++++ QT Pro: Begin Changed code ?> <td align="center" class="smallText"> <?php echo $options_values['products_options_track_stock']?"Yes":"No"; ?></td> <?php //++++ QT Pro: End Changed Code ?> <td align="center" class="smallText"> <?php echo '<a href="' . tep_href_link(FILENAME_PRODUCTS_ATTRIBUTES, 'action=update_option&option_id=' . $options_values['products_options_id'] . '&' . $page_info, 'NONSSL') . '">'; ?><?php echo tep_image_button('button_edit.gif', IMAGE_UPDATE); ?></a> <?php echo '<a href="' . tep_href_link(FILENAME_PRODUCTS_ATTRIBUTES, 'action=delete_product_option&option_id=' . $options_values['products_options_id'] . '&' . $page_info, 'NONSSL') , '">'; ?><?php echo tep_image_button('button_delete.gif', IMAGE_DELETE); ?></a> </td> <?php } ?> </tr> <?php $max_options_id_query = tep_db_query("select max(products_options_id) + 1 as next_id from " . TABLE_PRODUCTS_OPTIONS); $max_options_id_values = tep_db_fetch_array($max_options_id_query); $next_id = $max_options_id_values['next_id']; } ?> <tr> <?php //++++ QT Pro: Begin Changed code ?> <td colspan="4"><?php echo tep_black_line(); ?></td> <?php //++++ QT Pro: End Changed Code ?> </tr> <?php if ($action != 'update_option') { ?> <tr class="<?php echo (floor($rows/2) == ($rows/2) ? 'attributes-even' : 'attributes-odd'); ?>"> <?php echo '<form name="options" action="' . tep_href_link(FILENAME_PRODUCTS_ATTRIBUTES, 'action=add_product_options&' . $page_info, 'NONSSL') . '" method="post"><input type="hidden" name="products_options_id" value="' . $next_id . '">'; $inputs = ''; for ($i = 0, $n = sizeof($languages); $i < $n; $i ++) { $inputs .= $languages[$i]['code'] . ': <input type="text" name="option_name[' . $languages[$i]['id'] . ']" size="20"> <br>'; } ?> <td align="center" class="smallText"> <?php echo $next_id; ?> </td> <td class="smallText"><?php echo $inputs; ?></td> <?php //++++ QT Pro: Begin Changed code ?> <td align="center" ><input type=checkbox name=track_stock></td> <td align="left" class="smallText"> <?php echo tep_image_submit('button_insert.gif', IMAGE_INSERT); ?> </td> <?php //++++ QT Pro: End Changed Code echo '</form>' ?> </tr> <tr> <?php //++++ QT Pro: Begin Changed code ?> <td colspan="4"><?php echo tep_black_line(); ?></td> <?php //++++ QT Pro: End Changed Code ?> </tr> <?php } } ?> </table></td> <!-- options eof //--> -------------------------------- Hope that helps solve your error too! Good luck. SagarJ brad.bulger and taitaiji 2 Quote Link to comment Share on other sites More sharing options...
velvetpixel Posted September 17, 2011 Share Posted September 17, 2011 Hi All, I found the root cause of the error - "unexpected T_CONSTANT_ENCAPSED_STRING, expecting ',' or ';' error?" on line 290. Its solution is mentioned in the file - Manual_for_2.3.1.html, which has the step by step instructions. A bit of clarity is required, though. For manual step 11.3, the section that mentions : Find: <!-- options //--> to <!-- options eof //--> Change all between to: In the code given to be replaced, there are 4 unfinished "echo" statements (with no code immediately following the '). The statements are just displayed as follows: echo ' The instruction in the manual states to add the code from your existing "admin/products_attributes.php" file to complete each of the corresponding echo statements. In my case, I was using the vanilla products_attributes.php which came default with the OSC 2.3.1 install. I have replaced the echo statements accordingly and the code works! If you simply copy the code from step 11.3 into notepad, the unfinished echo ' statements are on Line 119, 138, 175, & 190. The complete code for step 11.3 which worked for me is given below: ----------------------------------------- -------------------------------- Hope that helps solve your error too! Good luck. SagarJ Awesome! Thank you for clarifying that and my install works now! :) Quote osCommerce 2.3.1 Add-Ons Installed Header Tags SEO Ultimate SEO URLs Google Sitemap SEO Easy Populate QT Pro Margin Report AJAX Attribute Manager Smart Columns CKEditor OSCThumb Select Product Image Directory Category CSS Menu Enable Disable Categories Contact Form Captcha Link to comment Share on other sites More sharing options...
slugg0 Posted September 18, 2011 Share Posted September 18, 2011 Just installed QTPro (4.6.1 on OSC 2.3.1) When I add an attribute, I get 1136 - Column count doesn't match value count at row 1 insert into products_attributes values (null, '30', '1', '1', '0', '+') [TEP STOP] What do I do? Quote Link to comment Share on other sites More sharing options...
slugg0 Posted September 18, 2011 Share Posted September 18, 2011 (edited) ( can't edit my last post for some reason, put this in a new one instead: ) I found this line in products_attributes.php, guess this has something to do with it? (Line 62) tep_db_query("insert into " . TABLE_PRODUCTS_ATTRIBUTES . " values (null, '" . (int)$products_id . "', '" . (int)$options_id . "', '" . (int)$values_id . "', '" . (float)tep_db_input($value_price) . "', '" . tep_db_input($price_prefix) . "')"); Or this (Line 116): tep_db_query("update " . TABLE_PRODUCTS_ATTRIBUTES . " set products_id = '" . (int)$products_id . "', options_id = '" . (int)$options_id . "', options_values_id = '" . (int)$values_id . "', options_values_price = '" . (float)tep_db_input($value_price) . "', price_prefix = '" . tep_db_input($price_prefix) . "' where products_attributes_id = '" . (int)$attribute_id . "'"); ? Edited September 18, 2011 by slugg0 Quote Link to comment Share on other sites More sharing options...
slugg0 Posted September 19, 2011 Share Posted September 19, 2011 Anyone? Please! -I'm completely stuck here.... :( Quote Link to comment Share on other sites More sharing options...
velvetpixel Posted September 19, 2011 Share Posted September 19, 2011 Anyone? Please! -I'm completely stuck here.... Did you verify that all your changes are correct AND that you did not remove needed code from any other add-ons when doing the install? Quote osCommerce 2.3.1 Add-Ons Installed Header Tags SEO Ultimate SEO URLs Google Sitemap SEO Easy Populate QT Pro Margin Report AJAX Attribute Manager Smart Columns CKEditor OSCThumb Select Product Image Directory Category CSS Menu Enable Disable Categories Contact Form Captcha Link to comment Share on other sites More sharing options...
slugg0 Posted September 20, 2011 Share Posted September 20, 2011 Yes, unless I missed something twice... Anyways, there were som other problem too, since I then got another error.. Tried to restore from my previosly functioning state, but that caused yet another error... So I ended up with deleting my entire catalog and database and now, i'm trying to restore the entire site... We'll see if it'll work next time..... Quote Link to comment Share on other sites More sharing options...
velvetpixel Posted September 27, 2011 Share Posted September 27, 2011 Is there any way to auto generate baseline starting quantities for QT Pro stock quantities for all attributes for products? I now have about 700 sick products and each product has multiple attributes with more than 6 choices per attribute so at least 12 stock quantities per product. That's 8400 stock quantities i need to manually enter!!!! GAA IM BLINDED :) Quote osCommerce 2.3.1 Add-Ons Installed Header Tags SEO Ultimate SEO URLs Google Sitemap SEO Easy Populate QT Pro Margin Report AJAX Attribute Manager Smart Columns CKEditor OSCThumb Select Product Image Directory Category CSS Menu Enable Disable Categories Contact Form Captcha Link to comment Share on other sites More sharing options...
velvetpixel Posted September 27, 2011 Share Posted September 27, 2011 Oh wait color - 8 choices size - 6 choices 6 x 8 is 48 48 x 700 = 33600 So I only have to enter 33600 stock quantities manually and those products are not available but are on the site since customers cannot pick a size or quantity till the quantities are added so I have dead product on my site :( Quote osCommerce 2.3.1 Add-Ons Installed Header Tags SEO Ultimate SEO URLs Google Sitemap SEO Easy Populate QT Pro Margin Report AJAX Attribute Manager Smart Columns CKEditor OSCThumb Select Product Image Directory Category CSS Menu Enable Disable Categories Contact Form Captcha Link to comment Share on other sites More sharing options...
KomplikatedOne Posted October 5, 2011 Share Posted October 5, 2011 sorry if this has been covered but with 101 pages of discussion i got bored of looking has anyone encountered problems with the attributes no longer appearing at the checkout_confirmation.php stage? i havent got a huge amount of mods on my site, and QTPro is the only one i can see mentioned on any of the files used by the checkout process shows item model and item name, price info etc but attributes field is blank, i am in process of revertting files back to standard to see if i can identify on which one the problem is Quote Link to comment Share on other sites More sharing options...
KomplikatedOne Posted October 5, 2011 Share Posted October 5, 2011 ok issue is in order.php somewhere, as works with untouched version Quote Link to comment Share on other sites More sharing options...
p2409 Posted October 11, 2011 Share Posted October 11, 2011 (edited) Is there any way to auto generate baseline starting quantities for QT Pro stock quantities for all attributes for products? I now have about 700 sick products and each product has multiple attributes with more than 6 choices per attribute so at least 12 stock quantities per product. That's 8400 stock quantities i need to manually enter!!!! GAA IM BLINDED Velvet Pixel, I'm going through the same problem at the moment. The only way to deal with it is to write some hardcore PHP accessing the databases directly. I'm writing up a PHP script to do this, not sure when I'll finish it - it has to fit between real work! Thanks SagarJ for that revised products_attribute.php file - the state of the current contribution is crappy with this kind of work being required to get it going. The help file with it's 'echo '<NOTHING' code leaves alot to be desired quality wise - so much so I'd say unless you're au fait with PHP/MySQL I wouldn't both with it. Shame because it's a great mod. At the same time, remember we are bolting on something osc wasn't at all designed for, so attributes stock handling with this package is always going to be tedious/difficult. Note to people considering this mod (and those posting 'Help Please' in this thread) : you will in all likelihood require some PHP coding to get it going. If you're not up to it ie. all you know is how to parrot-like copy code, I seriously wouldn't bother with it till you've learnt coding. Slugg0 you might want to think about this before you waste a few weeks of frustration. Edited October 11, 2011 by p2409 Quote OSC User Definitions "I can add modules to OSC" = I can search, cut and paste. But not well, or I wouldn't be here. "I start my posting with 'works like a charm' = I'm letting you down gently, nothing works and I have no idea why "I finish postings with "plzzzz....hlp" = My installation is buggered and I know I'm going to have to pay someone, but I really, really don't want to. Link to comment Share on other sites More sharing options...
p2409 Posted October 11, 2011 Share Posted October 11, 2011 Also guys don't forget to make the simple mod to /admin/functions/general.php to stop osc from breaking when you delete an empty category. You can leave the installation as is if you want, but remember you will need to only delete categories with at least one product in them for it to work (annoyance factor more than anything). I've put it here if you ready to just go ahead with it: Change //++++ QT Pro: Begin Changed code JOC qtpro_doctor_amputate_all_from_product($product_id); //++++ QT Pro: End Changed code To //++++ QT Pro: Begin Changed code JOC if ($products_id!=null) qtpro_doctor_amputate_all_from_product($product_id); //++++ QT Pro: End Changed code The QTPro for 2.3 addon page has this on it now. Quote OSC User Definitions "I can add modules to OSC" = I can search, cut and paste. But not well, or I wouldn't be here. "I start my posting with 'works like a charm' = I'm letting you down gently, nothing works and I have no idea why "I finish postings with "plzzzz....hlp" = My installation is buggered and I know I'm going to have to pay someone, but I really, really don't want to. Link to comment Share on other sites More sharing options...
Juto Posted October 12, 2011 Share Posted October 12, 2011 Also guys don't forget to make the simple mod to /admin/functions/general.php to stop osc from breaking when you delete an empty category. You can leave the installation as is if you want, but remember you will need to only delete categories with at least one product in them for it to work (annoyance factor more than anything). I've put it here if you ready to just go ahead with it: Change //++++ QT Pro: Begin Changed code JOC qtpro_doctor_amputate_all_from_product($product_id); //++++ QT Pro: End Changed code To //++++ QT Pro: Begin Changed code JOC if ($products_id!=null) qtpro_doctor_amputate_all_from_product($product_id); //++++ QT Pro: End Changed code The QTPro for 2.3 addon page has this on it now. The above if statement must be like this: if (tep_not_null($products_id)) {qtpro_doctor_amputate_all_from_product($product_id);} Sara Quote Contributions: http://addons.oscommerce.com/info/8010 http://addons.oscommerce.com/info/8204 http://addons.oscommerce.com/info/8681 Link to comment Share on other sites More sharing options...
rrosenau Posted October 18, 2011 Share Posted October 18, 2011 (edited) Help!! Getting this error when trying to go to Admin>Catalog>Product Attributes Fatal error: Cannot redeclare qtpro_products_attributes_string2array() (previously declared in /home/tgides5/public_html/adminrrr/includes/functions/qtpro_functions.php:19) in /home/tgides5/public_html/adminrrr/includes/functions/qtpro_functions.php on line 33 What am I doing wrong?? Got it, copied the wrong code!!! Another question, where can I edit the message "The combination of options you have selected is currently out of stock. Please select another combination." Edited October 18, 2011 by rrosenau Quote Link to comment Share on other sites More sharing options...
slugg0 Posted October 22, 2011 Share Posted October 22, 2011 In the catalog/includes/languages/english/product_info.php you will find these lines: define('TEXT_OUT_OF_STOCK', 'Out of stock'); define('TEXT_OUT_OF_STOCK_MESSAGE', 'The combination of options you have selected is currently out of stock. Please select another combination.'); define('TEXT_SELECT_OPTIONS', 'You must select product options before adding this product to your cart.'); define('STOCK_LIST_IN_PI_TEXT_HEADING', 'Currently on stock:'); define('STOCK_LIST_IN_PI_TEXT_PRICE', 'Price'); define('STOCK_LIST_IN_PI_TEXT_STOCK', 'Qty.'); All of those belongs to QTPro. Quote Link to comment Share on other sites More sharing options...
♥14steve14 Posted November 7, 2011 Share Posted November 7, 2011 Has anyone sucessfully integrated this contribution with the Sppc addon. Quote REMEMBER BACKUP, BACKUP AND BACKUP Link to comment Share on other sites More sharing options...
RBA55 Posted November 8, 2011 Share Posted November 8, 2011 Anyone know how to change the foreground/background colours of the 'out of stock' warning message on the product_info page? I can't read it with my template mods. Quote Link to comment Share on other sites More sharing options...
taitaiji Posted November 10, 2011 Share Posted November 10, 2011 Hello there, My big and maybe simple problem: I can't find the Track Stock check box!? There is no such option... QtPro Options appear everywhere in my Admin, just not in Attributes, where most needed. Please help! What am I overlooking? Thank you* Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.