nox171 Posted December 11, 2006 Share Posted December 11, 2006 Hallo everyone, After stucking all the day trying to install oscommerce (and reading your forum) ,I decided to post a new topic. First of all sorry for my english... I run Ispconfig under a suse installation hosted in a webfarm. Following the installation step I created a new site with a new user and database. I have downloaded the oscommerce file on my machine, unzipped and via FTP (binary mode) uploaded to the new site under the folder: .../web18/web/ In the site configuration the safe php option is off and I've added the following line in the form: php_admin_flag register_globals on php_admin_flag register_long_arrays on php_admin_flag magic_quotes_gpc on php_value upload_max_filesize 128M php_value post_max_size 128M LimitRequestBody 134217728 php_admin_flag session.autostart off php_value register_long_arrays on php_admin_flag register_globals on But after that if I try to go to my installation page http://mysite.com/catalog/install/ I always get a blank page!! Whit no code inside... :( :( Have anybody got some idea?! Please I'm very desperate.... Thanks /nox Link to comment Share on other sites More sharing options...
nox171 Posted December 12, 2006 Author Share Posted December 12, 2006 How it can be possible that I receive a white page instead of the installation page? I tryed the configuration again without the catalog folder but the result is the same... :( The white page could be possible because the php scripts don't work well?!?! :huh: Link to comment Share on other sites More sharing options...
nox171 Posted December 13, 2006 Author Share Posted December 13, 2006 How it can be possible that I receive a white page instead of the installation page?I tryed the configuration again without the catalog folder but the result is the same... :( The white page could be possible because the php scripts don't work well?!?! :huh: Hi, always locked on the same blank page. Could it be possible because in the httpd.conf file I have AllowOverride none?? Is possible to change it not for all the sites but only for one? Some code to insert in my ISPconfig Apache directive... Because I receive this message # AllowOverride All # NOT SUPPORTED! Link to comment Share on other sites More sharing options...
Nike1984 Posted December 13, 2006 Share Posted December 13, 2006 Hi,always locked on the same blank page. Could it be possible because in the httpd.conf file I have AllowOverride none?? Is possible to change it not for all the sites but only for one? Some code to insert in my ISPconfig Apache directive... Because I receive this message # AllowOverride All # NOT SUPPORTED! How did you add those lines to the form??? Was that a .htaccess file you created? Or how else did u do it? N Link to comment Share on other sites More sharing options...
nox171 Posted December 13, 2006 Author Share Posted December 13, 2006 How did you add those lines to the form??? Was that a .htaccess file you created? Or how else did u do it? N I add those lines on the Apache directives form on my ISPconfig panel in the specific site. And I received that error because the ISPconfig do not support that instruction. Now I tried with this: php_admin_flag register_long_arrays on php_admin_flag register_globals on php_admin_flag magic_quotes_gpc on <Directory /var/www/web37/web> Options +Includes +FollowSymlinks -Indexes AllowOverride all Order allow,deny Allow from all <Files ~ '^.ht'> Deny from all </Files> </Directory> It seams that it works with no error but I receive always a blank page!! <_< Link to comment Share on other sites More sharing options...
Nike1984 Posted December 13, 2006 Share Posted December 13, 2006 I add those lines on the Apache directives form on my ISPconfig panel in the specific site.And I received that error because the ISPconfig do not support that instruction. Now I tried with this: php_admin_flag register_long_arrays on php_admin_flag register_globals on php_admin_flag magic_quotes_gpc on <Directory /var/www/web37/web> Options +Includes +FollowSymlinks -Indexes AllowOverride all Order allow,deny Allow from all <Files ~ '^.ht'> Deny from all </Files> </Directory> It seams that it works with no error but I receive always a blank page!! <_< Well, you wrote earlier, that in your httpd.conf AllowOverride is set to none, that's what's causing that blank page. N Link to comment Share on other sites More sharing options...
nox171 Posted December 13, 2006 Author Share Posted December 13, 2006 Well, you wrote earlier, that in your httpd.conf AllowOverride is set to none, that's what's causing that blank page.N Yes, I know that should be set to "all", but I want to change it only for this site and not for the entire sites.. Is it possible?? Link to comment Share on other sites More sharing options...
Guest Posted December 14, 2006 Share Posted December 14, 2006 I just had the exact same problem with my install on ISPConfig. The solution for me was setting the include path through ini_set as follows ini_set('include_path', '.:/usr/share/php5'); Link to comment Share on other sites More sharing options...
nox171 Posted December 19, 2006 Author Share Posted December 19, 2006 I just had the exact same problem with my install on ISPConfig. The solution for me was setting the include path through ini_set as follows ini_set('include_path', '.:/usr/share/php5'); Sorry... but where did you add this line? In the Apache Directives or did you create a file? Link to comment Share on other sites More sharing options...
Guest Posted December 20, 2006 Share Posted December 20, 2006 Sorry I wasn't more clear. As a quick test to see if this will do it, just copy this line: ini_set('include_path', '.:/usr/share/php5'); into the top of index.php in the install folder. Then try again to run the install proccess and see if the page comes up. This line of code changes the include path for that page before it loads, however, after the script has executed, the include path goes back to what it is set as in the php.ini file on the server. So instead of adding that line on all of the pages in oscommerce, you can then set the include path through the apache directives with the line: php_value include_path '.:/usr/share/php5' Link to comment Share on other sites More sharing options...
WendellAdkins Posted December 20, 2006 Share Posted December 20, 2006 Hallo everyone,After stucking all the day trying to install oscommerce (and reading your forum) ,I decided to post a new topic. First of all sorry for my english... I run Ispconfig under a suse installation hosted in a webfarm. Following the installation step I created a new site with a new user and database. I have downloaded the oscommerce file on my machine, unzipped and via FTP (binary mode) uploaded to the new site under the folder: .../web18/web/ In the site configuration the safe php option is off and I've added the following line in the form: php_admin_flag register_globals on php_admin_flag register_long_arrays on php_admin_flag magic_quotes_gpc on php_value upload_max_filesize 128M php_value post_max_size 128M LimitRequestBody 134217728 php_admin_flag session.autostart off php_value register_long_arrays on php_admin_flag register_globals on But after that if I try to go to my installation page http://mysite.com/catalog/install/ I always get a blank page!! Whit no code inside... :( :( Have anybody got some idea?! Please I'm very desperate.... Thanks /nox If I read this right the address you should be using is http://www.yoursite.com/web18/web/catalog/install Link to comment Share on other sites More sharing options...
nox171 Posted December 22, 2006 Author Share Posted December 22, 2006 Sorry I wasn't more clear. As a quick test to see if this will do it, just copy this line: ini_set('include_path', '.:/usr/share/php5'); into the top of index.php in the install folder. Then try again to run the install proccess and see if the page comes up. This line of code changes the include path for that page before it loads, however, after the script has executed, the include path goes back to what it is set as in the php.ini file on the server. So instead of adding that line on all of the pages in oscommerce, you can then set the include path through the apache directives with the line: php_value include_path '.:/usr/share/php5' Thank you very much Jays_rhino!! Now the installation works! Cheers Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.