Mfred Posted April 1, 2006 Share Posted April 1, 2006 Haven't tested the new code, but I think you understand the reason for the missing thumbnail. Hi, ok I understand where the problem is but readding SMALL_IMAGE_* is shrinking my pictures again from original size. Is there any other workaround for it? Still strange its only a IE problem :/ bye, mfred Quote Link to comment Share on other sites More sharing options...
mloeffen Posted April 1, 2006 Author Share Posted April 1, 2006 ok I understand where the problem is but readding SMALL_IMAGE_* is shrinking my pictures again from original size. Is there any other workaround for it? Try this instead to maintain normal image size <td align="center"> <?php echo tep_image(DIR_WS_IMAGES . $product_info['products_image'], $product_info['products_name'], '100%', '100%', 'hspace="5" vspace="5"'); ?> </td> Still strange its only a IE problem :/ Microsoft :-" Quote Link to comment Share on other sites More sharing options...
Mfred Posted April 1, 2006 Share Posted April 1, 2006 Try this instead to maintain normal image size <td align="center"> <?php echo tep_image(DIR_WS_IMAGES . $product_info['products_image'], $product_info['products_name'], '100%', '100%', 'hspace="5" vspace="5"'); ?> </td> Microsoft :-" % is not working as it is resizing to the table width/height. For now I just filled with 200, 150 as until now all my pictures are of the same size. THX 4 your help! mfred Quote Link to comment Share on other sites More sharing options...
punkandp Posted April 6, 2006 Share Posted April 6, 2006 Does anyone know a way to make my resized .jpg appear with a black background, currently it is white. This was the resize code I added. if (empty($allow_larger) && ($_GET['w'] > $image[0] || $_GET['h'] > $image[1])) { // existing image is smaller than thumbnail so create the thumbnail // with the smaller original image centred on it $dx = ($_GET['w'] - $image[0]) / 2; $dy = ($_GET['h'] - $image[1]) / 2; imagecopy($tmp_img, $src, $dx, $dy, 0, 0, $image[0], $image[1]); } else if (function_exists('imagecopyresampled') && $use_resampling) { I am not a programer so I am not sure how to add this myself. I tried to change the gif background values at the top of the page, but I am sure they are not related to .jpgs, any help would be much appericated, even after about an hour of reading about GD I am still unsure on how to add this feature. Quote Link to comment Share on other sites More sharing options...
punkandp Posted April 7, 2006 Share Posted April 7, 2006 oddly I changed the image size, and now my background is black, thanks for the contrib it has been a real help esp cause I have changed my picture sizes alot. Does anyone know a way to make my resized .jpg appear with a black background, currently it is white.This was the resize code I added. if (empty($allow_larger) && ($_GET['w'] > $image[0] || $_GET['h'] > $image[1])) { // existing image is smaller than thumbnail so create the thumbnail // with the smaller original image centred on it $dx = ($_GET['w'] - $image[0]) / 2; $dy = ($_GET['h'] - $image[1]) / 2; imagecopy($tmp_img, $src, $dx, $dy, 0, 0, $image[0], $image[1]); } else if (function_exists('imagecopyresampled') && $use_resampling) { I am not a programer so I am not sure how to add this myself. I tried to change the gif background values at the top of the page, but I am sure they are not related to .jpgs, any help would be much appericated, even after about an hour of reading about GD I am still unsure on how to add this feature. Quote Link to comment Share on other sites More sharing options...
TENCENTS Posted April 10, 2006 Share Posted April 10, 2006 For those who can only get the thumbnail chaching to work when you leave the $tn_path variable blank, I solved this probelm with the following change in product_thumb.php: Find: Replace With: The file was assuming backslashes as I am on a windows server but the assumption was wrong. Seems PHP is perfectly capable of handling forward slashes on Windows 2003 Server. voidstate You hit it on the nail (pardon the pun) - thanks voidstate. I must admit this one had me stumped - I setup my local dev.server last week, and after a bit of a frustrating learning curve I had everything working perfectly - EXCEPT for the thumbnails. Strange was that the full size picture (i.e. click here to enlarge) show perfectly, but no images on any thumbnails - the sizes were right but just no rendering. This fix worked 100% - Thanks a million!!. :thumbsup: :thumbsup: B) Quote Never underestimate the power of stupid people, especially in groups. Link to comment Share on other sites More sharing options...
TENCENTS Posted April 10, 2006 Share Posted April 10, 2006 You hit it on the nail (pardon the pun) - thanks voidstate. I must admit this one had me stumped - I setup my local dev.server last week, and after a bit of a frustrating learning curve I had everything working perfectly - EXCEPT for the thumbnails. Strange was that the full size picture (i.e. click here to enlarge) show perfectly, but no images on any thumbnails - the sizes were right but just no rendering. This fix worked 100% - Thanks a million!!. :thumbsup: :thumbsup: B) I was refering to Post #120 in this support forum ('On The Fly' Auto Thumbnailer using GD Library 2.1) Quote Never underestimate the power of stupid people, especially in groups. Link to comment Share on other sites More sharing options...
Annakay Posted April 13, 2006 Share Posted April 13, 2006 Now I have read the entire thread and still I am lost. I have tried to install this contrib twice, and it simply won't work. I have tried the thumbnail folder tricks and everything else I have found here, but my thumbnails still won't show. PHP Version: 4.3.11 osCommerce: 2.2-MS2 GD Version: bundled (2.0.28 compatible) I have done the installation by the letter, twice, read this entire thread for help, but still there is no images. I bet there is a crappy liiittle mistake I have made, but I can't find it. My customer wants to start using her webshop soon so it is a bit urgent. PLEASE HELP ME! :( The image url seems correct: img src="product_thumb.php?img=images/DSC01636.JPG&w=100&h=75" or isn't it? My testshop is here: http://www.sirlig.se/shop Quote Link to comment Share on other sites More sharing options...
Annakay Posted April 13, 2006 Share Posted April 13, 2006 Never mind... Quote Link to comment Share on other sites More sharing options...
XionNova Posted April 13, 2006 Share Posted April 13, 2006 I'm confused as to how this problem is related to On the Fly, but it is somehow. Here's the problem: http://inhealth.tempwebpage.com/catalog/in...php?cPath=14_36 See the double titles? Not cool. I know the problem involves On the Fly because when I replace the altered html_output.php with the original, the problem goes away. The fact that nobody else has posted this problem leads me to believe that it's some kind of conflict with another contrib I have installed. But none of the other contribs I have needed to edit html_output.php! I've debated just nuking the titles altogether in index.php... but yeah. I'd rather have it fixed. Thanks for any help! -Daniel Quote Link to comment Share on other sites More sharing options...
joep147 Posted April 17, 2006 Share Posted April 17, 2006 hey, i've installed this nice contrib, works superb on the catalog side, it also works on the admin side, but not all the way. Some images in admin are missing (like the 'online catalog'-image on the right top corner in admin) and there are no flags visible, e.g. on the edit-pag of a product at Products Name. i read the whole topic, there is no word or info on this problem Quote Link to comment Share on other sites More sharing options...
joep147 Posted April 17, 2006 Share Posted April 17, 2006 (edited) hey again :) forgot to tell: installed version is(/was for admin side) OTF2_1_2b with bugfix for osc2.2 M2 now i'm running this contrib only at the catalog side, leaving me out of proportion images in admin :P this contrib, however, is worth (temporarily?) this backside :Y) Edited April 17, 2006 by joep147 Quote Link to comment Share on other sites More sharing options...
bmm Posted April 20, 2006 Share Posted April 20, 2006 Trying this contribution on a new/test install. I have run into a problem with the thumbnailed images loosing their color. It is not consistant, but only a few out of the 30 or so I have installed into the test catalog. If you click to enlarge the image, the color is displayed properly. Here is a sample link http://www.bigmoosemall.com/bta/product_in...&products_id=63 Thanks for any info! Quote Link to comment Share on other sites More sharing options...
CivicRacingGirl7 Posted April 21, 2006 Share Posted April 21, 2006 I'm trying to use the "Display OSC products in Mambo" contrib (or the "Infoboxes outside OSC" contrib), but the thumbs don't display in the box outside of the OSC install. I have a thumbnail-sized "No Image" image, which displays, but any product image that there is actually an image for, will not display. After checking the image source, it was trying to pull http://mysite.com/otherdirectory/product_t...mg=images/ETC... , rather than pulling the image from the shop directory. I have modified the code so that it would call from the shop directory, but apparently what I did didn't work all that great, as the images show now, but it is pulling the full-size image and then resizing it. Any ideas? Quote Link to comment Share on other sites More sharing options...
juhanes Posted May 1, 2006 Share Posted May 1, 2006 HI! I really like this contribution, but if i understand right, there is impossible to use transparent pictures. I tried GIF'S and PNG'S and i only get like this Is there anythink to do, please help. Quote Link to comment Share on other sites More sharing options...
mh5bl Posted May 3, 2006 Share Posted May 3, 2006 I am using this addin and it is great but I am using some images that are 500 to 600 kb in size 3500 x 3000 pix. Images of this size, the thumb do not work. (smaller images do work) see link below:- http://www.skitalianfurniture.co.uk/test/i...php?cPath=25_28 question is there a max images size by KB or pix ??? any help thanks mark Quote Link to comment Share on other sites More sharing options...
xuvious Posted May 5, 2006 Share Posted May 5, 2006 Hello all i wonder if you can help - ive installed the auto thumbnailer contribution and it seems to haver worked for some of my images in the shop but not the rest looking on the server all of the product images are in the same folder (catalog/images/) not sub directories but i can not work this out - please help!!!! Quote Link to comment Share on other sites More sharing options...
Mufty Posted May 5, 2006 Share Posted May 5, 2006 Hi, first i like this Contribute! Good work!!! Now my problem :blush: I upload my products with a full path for the images. Like: http://www.fixversand.de/ebay/dema/d94009.jpg This is because we got a few different shops with sometimes the same products. I don't want to store the same image on X different locations. :thumbsup: Normaly OSC can't handle this. So i added some code to the products_thumb.php (start line 98): global $use404, $tn_browser_cache; if (isset($_SERVER["SERVER_PROTOCOL"]) && $_SERVER["SERVER_PROTOCOL"] == "HTTP/1.1") $httpProtocol = "HTTP/1.1"; else $httpProtocol = "HTTP/1.0"; if (substr($file,0,30) == 'http://www.fixversand.de/ebay/') { $filesubstr = str_replace(substr($file,0,30), '',$file); if (copy($file, 'images/' . $filesubstr)) { $file = 'images/' . $filesubstr; } else { // Copy failed. display a noimage.jpg --- not working $file = 'images/default/keinbild.jpg'; } } When i visit the products_thumb.php directly the image is copied and a thumbnail is shown. (cache mode) http://testshop.fixsi.de/product_thumb.php....jpg&w=91&h=100 But if i visit the products_info.php nothing is shown or copied. Even the call in the info.php is the same as the one i showed above! Any idea where the bug can be? Ah and another thing. After the thumbnail is shown in the browser the copied image should be deleted again. i tried this with: unlink('images/' . $filesubstr); at the end of the products_thumb.php. But nothing happens. :huh: Quote Link to comment Share on other sites More sharing options...
Guest Posted June 30, 2006 Share Posted June 30, 2006 Hello, I took OTF and installed it on my website. I installed the default image option, it displays a default image when a product image is not found. It worked perfectly fine. Then I ran into a problem with an update from my inventory provider, and after the next successful update the thumbnailer ceased to work. What happens is for images that dont exist the default image is shown, but for images that DO exist, it shows a broken image link. Someone please help. I am having a lot of trouble. I was supposed to roll my new store out 2 weeks ago, and I cant because of this and other mishaps. So you can see what exactly I am talking about check out my store, at www.pcpluscorp.com. Thanks, Rick Quote Link to comment Share on other sites More sharing options...
Guest Posted June 30, 2006 Share Posted June 30, 2006 Hello, I took OTF and installed it on my website. I installed the default image option, when it displays a default image when a product image is not found. It worked perfectly fine. Then I ran into a problem with an update from my inventory provider, and after the next successful update the thumbnailer ceased to work. What happens is for images that dont exist the default image is shown, but for images that DO exist, it shows a broken image link. Someone please help. I am having a lot of trouble. I was supposed to roll my ew store out 2 weeks ago, and I cant because of these mishaps. So you can see what exactly I am talking about check out my store, at www.pcpluscorp.com. Thanks, Rick Quote Link to comment Share on other sites More sharing options...
johnnymke Posted July 6, 2006 Share Posted July 6, 2006 Hi- product_thumbs.php cause mod_evasive to flip and block requests, especially on pages producing alot of thumbs. This is cited on this thread too: http://www.oscommerce.com/forums/index.php?showtopic=122761 Any help on that front? Here's my mod_evasive parameters: DOSHashTableSize 3097 DOSPageCount 100 DOSSiteCount 500 DOSPageInterval 1 DOSSiteInterval 1 DOSBlockingPeriod 1 I know its not the safest, but I figure DDoS attacks are generally pushing alot more requests than whats here... Any help appreciated... Quote Link to comment Share on other sites More sharing options...
janice171 Posted August 22, 2006 Share Posted August 22, 2006 Hi, i've installed this contrib and everything seems to be working ok. The thumbnail images are looking much cleaner and less jagged. Am i correct in thinking that all i do in admin is to set the width and height of the to pixel dimensions? Or does this have to be a %? Presumably all the images uploaded will be placed in the new tumbnails folder too? Does anyone know why the download time of the site is now increased?...everything is loading incredibly slowly!!! Thanks for any help. J Quote Link to comment Share on other sites More sharing options...
Benjjj6 Posted September 3, 2006 Share Posted September 3, 2006 hi, just a quick question Is there a way to change where the spreadsheet looks for images. In other words, it looks for the image name in "images/store/manufacturer/ " how would i change this so they are just put in images? Quote Link to comment Share on other sites More sharing options...
Guest Posted September 13, 2006 Share Posted September 13, 2006 Auto Thumbnailer works great! Maybe too great however. The way it's set up now ANYONE can resize and display his images using my server. Does anyone know of a way to change product_thumb.php so that it'll only resize images which originate from within my domain name or server? Having product_thumb.php resize any image thrown at it as it is now is just asking for abuse by spammers... Quote Link to comment Share on other sites More sharing options...
akvario Posted September 13, 2006 Share Posted September 13, 2006 Hello Thanks for a good mod. I've installed the mod, but i have a problem. For some reason index.php doesn't show the thumbnail, it shows the orginal image(!) On product_info.php, products_new.php, everything looks good. And the thumbnail is ok. Any idea how to fix this ? Or where to look to find out what is wrong ? Thanks again for a great mod and a great community. Regards Akvario Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.