Jump to content
  • Checkout
  • Login
  • Get in touch

osCommerce

The e-commerce.

Easy Populate & Products Attributes


VJ

Recommended Posts

In fact, it seems to corrupt the data. I fixed all the price_prefixes in phpmyadmin, exported with easypop, then took the csv back in, and the errors returned. Is this the fist time anyone has mentioned this? Is there an easy way to export the price_prefix as an explicit field, instead of combining it with the number, as ep does now?

Link to comment
Share on other sites

i dont know what you spreadsheet looks like, perhaps you could post a few lines or email them? i dont use the attributes section via ep, as it is not comprehensive enough for my attributes. rught now i have approximately 1600 individual attributes, which gives about 16000 different ways of doing things.

 

i do it with with a spread sheet, however generate the code for each item via excel.

Link to comment
Share on other sites

v_attribute_values_price_1_1

-250

-250

-250

 

Well, in the spreadsheet, there's not much to say, you have v_attribute_values_price_1_1, and a column of numbers underneath it, like so. Easypopulate gets that by combining price_1_1 with price_prefix, but doesn't give it back correctly, unfortunately. If I could set price_prefix myself in the spreadsheet, without ep interfering, my problem would be solved.

Link to comment
Share on other sites

$attribute_values_price_prefix = ($$v_attribute_values_price_var < 0) ? '-' : '+';

this line of code is supposed to differentiate between positive and negative so looking at the code just before and after this, i am thinking there should be an extra column in here as the attributes price and prefix go into a separate table named products_attributes.

 

thus, what i would do is manually add a product attribute with a neegative dollar value, then download the sheet and see where it puts it. then, turn back around and upload the same sheet only changing the dollar value to half of what you originally entered, to see if it does in fact update the negative number to another negative number.

Edited by Mibble
Link to comment
Share on other sites

I am getting this error message with my upload. Please help! I have read through about 13 pages of questions, and have seen this question in some form or another, but no answers that work. Please help! The permissions are fine, 777. It states that the file is uploaded but I can't locate it.

 

Error message:

 

File uploaded.

Temporary filename: /home/content/t/a/m/tamekalawrence/data/phpuR1DWb

User filename: WorldofProducts.txt

Size: 59024

 

All of the different probs that others are having are starting scare me. I need to get this taken care of, but what other probs await after this fix?

 

Tameka

Link to comment
Share on other sites

if you browse back to about page 10 or so, you will find my easy populate php script which has additional fields, you can use that as a reference to yours and modify it respectively.

Thanks mate,

 

I'll check it out and seeif I can get it to work.

 

Cheers

 

- Simon

Link to comment
Share on other sites

Mary, that happens when there is some corruption in the first part of your file. you should look at it or if you wish you can send it to me via email.

My problem is now corrected. The next day when I retried to click on the links , it worked! I have no idea how it came right. Either IE was misbehaving or there was a problem on my pc. Thanks for offering to help. This is a great forum. :D

Mary-Ann

Chief Cook and Bottlewasher

Jack-of-All-Trades

Running 2.2MS2

Link to comment
Share on other sites

Warning: The downloadable products directory does not exist: /home/content/t/a/m/tamekalawrence/html/catalogdownload/. Downloadable products will not work until this directory is valid.

 

I am now getting this error message. I checked the catalog/download file exists. Help!

 

Tameka

Link to comment
Share on other sites

:huh: I'm having the same problem. I'm a osCommerce newbie.

 

My 'temp' directory is catalog/temp

Its attributes are chmod'ed to 777

I have uploaded the file using FTP

I can see the file with my FTP client (it too is 777 of course)

 

However I'm getting the dreaded:-

 

Warning: file(../temp/EP-up.txt): failed to open stream: No such file or directory in <my directory stuff>\easypopulate.php on line 672

 

I'm running V2.2M2 and Easy Populate 2.74-MS2 on IIS/5.0 with PHP Version: 4.3.3 (Zend: 1.3.0)

 

Any help for a new lost sole gratefully received.

Link to comment
Share on other sites

Thanks for the quick response - but I'm not sure I understand the question. I didn't edit the definition of tempdir$ in easypopulate.php and, as the error message in my post shows PHP is constructing a path of '../temp/EP-up.txt'

 

I've not had problems before with IIS using / rather than \

 

Anyway I've just did a temp. Hack in easypopulate as a test, that constructs a microsoft path string (i.e. ..\temp\EP-up.txt) and the results are the same.

 

I can try this on an Apache site but I'll still need to get it working on this IIS site, so... I really appreciate any help.

Link to comment
Share on other sites

A clue and some Progress - I've just put a temporary hack into easypopulate.php that supplies the $readed function with the full path and that worked (sort of). My next step will be to try to make a more realistic/maintainable mod.

 

But does this mean that I'm the first to try to use EasyPopulate on IIS 5

Link to comment
Share on other sites

Thanks!! :D

 

Now i can upload with:

$tempdir='/catalog/temp/';

like you said...

 

Silly Me!! My first attempt was modify the tempdir vars, but without success.

Now, I know that 'easypopulate.php' only use the $tempdir variable (not the $tempdir2). I supposed, before, that in case the tempdir was not correct then locks for tempdir2. But it seems not to be that way.

I let tempdir and tempdir2 with the sames values, because maybe they will be used in a new updated EP contribution.

 

Thanks again, and still working in this great contribution. ;)

 

Sorry for my english... :rolleyes:

Link to comment
Share on other sites

the directory needs to be /catalog/temp for the downloads and the properties need to be 777

I didn't direct EP to go to catalogdownloads, it did it by itself. I know the file needed to come from catalog/temp. I got rid of the other error I was getting by inserting the file directly from the temp dir on EP. That is when I got this error. So for some reason or another the comp is looking in catalogdownload for something.

 

Also, I don't know why it is catalogdownload instead of catalog/download. I added a folder named catalogdownload on the same level as catalog and I don't get any error, but I still can't find the file or product info on my site. Thanks John! Help!

 

Tameka

Link to comment
Share on other sites

Eric, i would believe so for the first on iis with easy populate, as there are lots of complications with running properly on microsoft products, i now some have gotten other things to work, but not everything.

Link to comment
Share on other sites

you may want to post your easypopulate.php file here

sorry I didn't see that post until after my last post. Here is the EP.php file:

 

<?php

 

// Current EP Version

$curver = '2.72-MS2';

 

/*

$Id: easypopulate.php,v 2.72 2003/12/28 VJ Exp $

*/

 

//

//*******************************

//*******************************

// C O N F I G U R A T I O N

// V A R I A B L E S

//*******************************

//*******************************

 

// **** Temp directory ****

// if you changed your directory structure from stock and do not have /catalog/temp/, then you'll need to change this accordingly.

//

$tempdir = "/temp/";

$tempdir2 = "/temp/";

//

//**** File Splitting Configuration ****

// we attempt to set the timeout limit longer for this script to avoid having to split the files

// NOTE: If your server is running in safe mode, this setting cannot override the timeout set in php.ini

// uncomment this if you are not on a safe mode server and you are getting timeouts

// set_time_limit(330);

 

// if you are splitting files, this will set the maximum number of records to put in each file.

// if you set your php.ini to a long time, you can make this number bigger

global $maxrecs;

$maxrecs = 300; // default, seems to work for most people. Reduce if you hit timeouts

//$maxrecs = 4; // for testing

 

//**** Image Defaulting ****

global $default_images, $default_image_manufacturer, $default_image_product, $default_image_category;

 

// set them to your own default "We don't have any picture" gif

//$default_image_manufacturer = 'no_image_manufacturer.gif';

//$default_image_product = 'no_image_product.gif';

//$default_image_category = 'no_image_category.gif';

 

// or let them get set to nothing

$default_image_manufacturer = '';

$default_image_product = '';

$default_image_category = '';

 

//**** Status Field Setting ****

// Set the v_status field to "Inactive" if you want the status=0 in the system

// Set the v_status field to "Delete" if you want to remove the item from the system <- THIS IS NOT WORKING YET!

// If zero_qty_inactive is true, then items with zero qty will automatically be inactive in the store.

global $active, $inactive, $zero_qty_inactive, $deleteit;

$active = 'Active';

$inactive = 'Inactive';

//$deleteit = 'Delete'; // not functional yet

$zero_qty_inactive = true;

 

//**** Size of products_model in products table ****

// set this to the size of your model number field in the db. We check to make sure all models are no longer than this value.

// this prevents the database from getting fubared. Just making this number bigger won't help your database! They must match!

global $modelsize;

$modelsize = 15;

 

//**** Price includes tax? ****

// Set the v_price_with_tax to

// 0 if you want the price without the tax included

// 1 if you want the price to be defined for import & export including tax.

global $price_with_tax;

$price_with_tax =false;

 

// **** Quote -> Escape character conversion ****

// If you have extensive html in your descriptions and it's getting mangled on upload, turn this off

// set to 1 = replace quotes with escape characters

// set to 0 = no quote replacement

global $replace_quotes;

$replace_quotes = true;

 

// **** Field Separator ****

// change this if you can't use the default of tabs

// Tab is the default, comma and semicolon are commonly supported by various progs

// Remember, if your descriptions contain this character, you will confuse EP!

global $separator;

$separator = "\t"; // tab is default

//$separator = ","; // comma

//$separator = ";"; // semi-colon

//$separator = "~"; // tilde

//$separator = "-"; // dash

//$separator = "*"; // splat

 

// **** Max Category Levels ****

// change this if you need more or fewer categories

global $max_categories;

$max_categories = 3; // 7 is default

 

// VJ product attributes begin

// **** Product Attributes ****

// change this to false, if do not want to download product attributes

global $products_with_attributes;

$products_with_attributes = false;

 

// change this if you want to download selected product options

// this might be handy, if you have a lot of product options, and your output file exceeds 256 columns (which is the max. limit MS Excel is able to handle)

global $attribute_options_select;

//$attribute_options_select = array('Size', 'Model'); // uncomment and fill with product options name you wish to download // comment this line, if you wish to download all product options

// VJ product attributes end

 

 

 

 

// ****************************************

// Froogle configuration variables

// -- YOU MUST CONFIGURE THIS! IT WON'T WORK OUT OF THE BOX!

// ****************************************

 

// **** Froogle product info page path ****

// We can't use the tep functions to create the link, because the links will point to the admin, since that's where we're at.

// So put the entire path to your product_info.php page here

global $froogle_product_info_path;

$froogle_product_info_path = "http://www.your-domain/catalog/product_info.php";

 

// **** Froogle product image path ****

// Set this to the path to your images directory

global $froogle_image_path;

$froogle_image_path = "http://www.your-domain/catalog/images/";

 

// **** Froogle - search engine friendly setting

// if your store has SEARCH ENGINE FRIENDLY URLS set, then turn this to true

// I did it this way because I'm having trouble with the code seeing the constants

// that are defined in other places.

global $froogle_SEF_urls;

$froogle_SEF_urls = true;

 

 

// ****************************************

// End Froogle configuration variables

// ****************************************

 

//*******************************

//*******************************

// E N D

// C O N F I G U R A T I O N

// V A R I A B L E S

//*******************************

//*******************************

 

 

//*******************************

//*******************************

// S T A R T

// INITIALIZATION

//*******************************

//*******************************

 

 

require('includes/application_top.php');

require('includes/database_tables.php');

 

//*******************************

// If you are running a pre-Nov1-2002 snapshot of OSC, then we need this include line to avoid

// errors like:

// undefined function tep_get_uploaded_file

if (!function_exists(tep_get_uploaded_file)){

include ('easypopulate_functions.php');

}

//*******************************

 

// VJ product attributes begin

global $attribute_options_array;

$attribute_options_array = array();

 

if ($products_with_attributes == true) {

if (is_array($attribute_options_select) && (count($attribute_options_select) > 0)) {

foreach ($attribute_options_select as $value) {

$attribute_options_query = "select distinct products_options_id from " . TABLE_PRODUCTS_OPTIONS . " where products_options_name = '" . $value . "'";

 

$attribute_options_values = tep_db_query($attribute_options_query);

 

if ($attribute_options = tep_db_fetch_array($attribute_options_values)){

$attribute_options_array[] = array('products_options_id' => $attribute_options['products_options_id']);

}

}

} else {

$attribute_options_query = "select distinct products_options_id from " . TABLE_PRODUCTS_OPTIONS . " order by products_options_id";

 

$attribute_options_values = tep_db_query($attribute_options_query);

 

while ($attribute_options = tep_db_fetch_array($attribute_options_values)){

$attribute_options_array[] = array('products_options_id' => $attribute_options['products_options_id']);

}

}

}

// VJ product attributes end

 

global $filelayout, $filelayout_count, $filelayout_sql, $langcode, $fileheaders;

 

// these are the fields that will be defaulted to the current values in the database if they are not found in the incoming file

global $default_these;

$default_these = array(

'v_products_image',

#'v_products_mimage',

#'v_products_bimage',

#'v_products_subimage1',

#'v_products_bsubimage1',

#'v_products_subimage2',

#'v_products_bsubimage2',

#'v_products_subimage3',

#'v_products_bsubimage3',

'v_categories_id',

'v_products_price',

'v_products_quantity',

'v_products_weight',

'v_products_master',

'v_products_master_status',

'v_products_listing_status',

'v_date_avail',

'v_instock',

'v_tax_class_title',

'v_manufacturers_name',

'v_manufacturers_id',

'v_products_dim_type',

'v_products_length',

'v_products_width',

'v_products_height'

);

 

//elari check default language_id from configuration table DEFAULT_LANGUAGE

$epdlanguage_query = tep_db_query("select languages_id, name from " . TABLE_LANGUAGES . " where code = '" . DEFAULT_LANGUAGE . "'");

if (tep_db_num_rows($epdlanguage_query)) {

$epdlanguage = tep_db_fetch_array($epdlanguage_query);

$epdlanguage_id = $epdlanguage['languages_id'];

$epdlanguage_name = $epdlanguage['name'];

} else {

Echo 'Strange but there is no default language to work... That may not happen, just in case... ';

}

 

$langcode = ep_get_languages();

 

if ( $dltype != '' ){

// if dltype is set, then create the filelayout. Otherwise it gets read from the uploaded file

ep_create_filelayout($dltype); // get the right filelayout for this download

}

 

//*******************************

//*******************************

// E N D

// INITIALIZATION

//*******************************

//*******************************

 

 

if ( $download == 'stream' or $download == 'tempfile' ){

//*******************************

//*******************************

// DOWNLOAD FILE

//*******************************

//*******************************

$filestring = ""; // this holds the csv file we want to download

 

if ( $dltype=='froogle' ){

// set the things froogle wants at the top of the file

$filestring .= "# html_escaped=YES\n";

$filestring .= "# updates_only=NO\n";

$filestring .= "# product_type=OTHER\n";

$filestring .= "# quoted=YES\n";

}

 

$result = tep_db_query($filelayout_sql);

$row = tep_db_fetch_array($result);

 

// Here we need to allow for the mapping of internal field names to external field names

// default to all headers named like the internal ones

// the field mapping array only needs to cover those fields that need to have their name changed

if ( count($fileheaders) != 0 ){

$filelayout_header = $fileheaders; // if they gave us fileheaders for the dl, then use them

} else {

$filelayout_header = $filelayout; // if no mapping was spec'd use the internal field names for header names

}

//We prepare the table heading with layout values

foreach( $filelayout_header as $key => $value ){

$filestring .= $key . $separator;

}

// now lop off the trailing tab

$filestring = substr($filestring, 0, strlen($filestring)-1);

 

// set the type

if ( $dltype == 'froogle' ){

$endofrow = "\n";

} else {

// default to normal end of row

$endofrow = $separator . 'EOREOR' . "\n";

}

$filestring .= $endofrow;

 

$num_of_langs = count($langcode);

while ($row){

 

 

// if the filelayout says we need a products_name, get it

// build the long full froogle image path

$row['v_products_fullpath_image'] = $froogle_image_path . $row['v_products_image'];

// Other froogle defaults go here for now

$row['v_froogle_instock'] = 'Y';

$row['v_froogle_shipping'] = '';

$row['v_froogle_upc'] = '';

$row['v_froogle_color'] = '';

$row['v_froogle_size'] = '';

$row['v_froogle_quantitylevel'] = '';

$row['v_froogle_manufacturer_id'] = '';

$row['v_froogle_exp_date'] = '';

$row['v_froogle_product_type'] = 'OTHER';

$row['v_froogle_delete'] = '';

$row['v_froogle_currency'] = 'USD';

$row['v_froogle_offer_id'] = $row['v_products_model'];

$row['v_froogle_product_id'] = $row['v_products_model'];

 

// names and descriptions require that we loop thru all languages that are turned on in the store

foreach ($langcode as $key => $lang){

$lid = $lang['id'];

 

// for each language, get the description and set the vals

$sql2 = "SELECT *

FROM ".TABLE_PRODUCTS_DESCRIPTION."

WHERE

products_id = " . $row['v_products_id'] . " AND

language_id = '" . $lid . "'

";

$result2 = tep_db_query($sql2);

$row2 = tep_db_fetch_array($result2);

 

// I'm only doing this for the first language, since right now froogle is US only.. Fix later!

// adding url for froogle, but it should be available no matter what

if ($froogle_SEF_urls){

// if only one language

if ($num_of_langs == 1){

$row['v_froogle_products_url_' . $lid] = $froogle_product_info_path . '/products_id/' . $row['v_products_id'];

} else {

$row['v_froogle_products_url_' . $lid] = $froogle_product_info_path . '/products_id/' . $row['v_products_id'] . '/language/' . $lid;

}

} else {

if ($num_of_langs == 1){

$row['v_froogle_products_url_' . $lid] = $froogle_product_info_path . '?products_id=' . $row['v_products_id'];

} else {

$row['v_froogle_products_url_' . $lid] = $froogle_product_info_path . '?products_id=' . $row['v_products_id'] . '&language=' . $lid;

}

}

 

$row['v_products_name_' . $lid] = $row2['products_name'];

$row['v_products_description_' . $lid] = $row2['products_description'];

$row['v_products_url_' . $lid] = $row2['products_url'];

 

// froogle advanced format needs the quotes around the name and desc

$row['v_froogle_products_name_' . $lid] = '"' . strip_tags(str_replace('"','""',$row2['products_name'])) . '"';

$row['v_froogle_products_description_' . $lid] = '"' . strip_tags(str_replace('"','""',$row2['products_description'])) . '"';

 

// support for Linda's Header Controller 2.0 here

if(isset($filelayout['v_products_head_title_tag_' . $lid])){

$row['v_products_head_title_tag_' . $lid] = $row2['products_head_title_tag'];

$row['v_products_head_desc_tag_' . $lid] = $row2['products_head_desc_tag'];

$row['v_products_head_keywords_tag_' . $lid] = $row2['products_head_keywords_tag'];

}

// end support for Header Controller 2.0

}

 

// for the categories, we need to keep looping until we find the root category

 

// start with v_categories_id

// Get the category description

// set the appropriate variable name

// if parent_id is not null, then follow it up.

// we'll populate an aray first, then decide where it goes in the

$thecategory_id = $row['v_categories_id'];

$fullcategory = ''; // this will have the entire category stack for froogle

for( $categorylevel=1; $categorylevel<$max_categories+1; $categorylevel++){

if ($thecategory_id){

$sql2 = "SELECT categories_name

FROM ".TABLE_CATEGORIES_DESCRIPTION."

WHERE

categories_id = " . $thecategory_id . " AND

language_id = " . $epdlanguage_id ;

 

$result2 = tep_db_query($sql2);

$row2 = tep_db_fetch_array($result2);

// only set it if we found something

$temprow['v_categories_name_' . $categorylevel] = $row2['categories_name'];

// now get the parent ID if there was one

$sql3 = "SELECT parent_id

FROM ".TABLE_CATEGORIES."

WHERE

categories_id = " . $thecategory_id;

$result3 = tep_db_query($sql3);

$row3 = tep_db_fetch_array($result3);

$theparent_id = $row3['parent_id'];

if ($theparent_id != ''){

// there was a parent ID, lets set thecategoryid to get the next level

$thecategory_id = $theparent_id;

} else {

// we have found the top level category for this item,

$thecategory_id = false;

}

//$fullcategory .= " > " . $row2['categories_name'];

$fullcategory = $row2['categories_name'] . " > " . $fullcategory;

} else {

$temprow['v_categories_name_' . $categorylevel] = '';

}

}

// now trim off the last ">" from the category stack

$row['v_category_fullpath'] = substr($fullcategory,0,strlen($fullcategory)-3);

 

// temprow has the old style low to high level categories.

$newlevel = 1;

// let's turn them into high to low level categories

for( $categorylevel=6; $categorylevel>0; $categorylevel--){

if ($temprow['v_categories_name_' . $categorylevel] != ''){

$row['v_categories_name_' . $newlevel++] = $temprow['v_categories_name_' . $categorylevel];

}

}

// if the filelayout says we need a manufacturers name, get it

if (isset($filelayout['v_manufacturers_name'])){

if ($row['v_manufacturers_id'] != ''){

$sql2 = "SELECT manufacturers_name

FROM ".TABLE_MANUFACTURERS."

WHERE

manufacturers_id = " . $row['v_manufacturers_id']

;

$result2 = tep_db_query($sql2);

$row2 = tep_db_fetch_array($result2);

$row['v_manufacturers_name'] = $row2['manufacturers_name'];

}

}

 

 

// If you have other modules that need to be available, put them here

 

// VJ product attribs begin

if (isset($filelayout['v_attribute_options_id_1'])){

$languages = tep_get_languages();

 

$attribute_options_count = 1;

foreach ($attribute_options_array as $attribute_options) {

$row['v_attribute_options_id_' . $attribute_options_count] = $attribute_options['products_options_id'];

 

for ($i=0, $n=sizeof($languages); $i<$n; $i++) {

$lid = $languages[$i]['id'];

 

$attribute_options_languages_query = "select products_options_name from " . TABLE_PRODUCTS_OPTIONS . " where products_options_id = '" . (int)$attribute_options['products_options_id'] . "' and language_id = '" . (int)$lid . "'";

 

$attribute_options_languages_values = tep_db_query($attribute_options_languages_query);

 

$attribute_options_languages = tep_db_fetch_array($attribute_options_languages_values);

 

$row['v_attribute_options_name_' . $attribute_options_count . '_' . $lid] = $attribute_options_languages['products_options_name'];

}

 

$attribute_values_query = "select products_options_values_id from " . TABLE_PRODUCTS_OPTIONS_VALUES_TO_PRODUCTS_OPTIONS . " where products_options_id = '" . (int)$attribute_options['products_options_id'] . "' order by products_options_values_id";

 

$attribute_values_values = tep_db_query($attribute_values_query);

 

$attribute_values_count = 1;

while ($attribute_values = tep_db_fetch_array($attribute_values_values)) {

$row['v_attribute_values_id_' . $attribute_options_count . '_' . $attribute_values_count] = $attribute_values['products_options_values_id'];

 

$attribute_values_price_query = "select options_values_price, price_prefix from " . TABLE_PRODUCTS_ATTRIBUTES . " where products_id = '" . (int)$row['v_products_id'] . "' and options_id = '" . (int)$attribute_options['products_options_id'] . "' and options_values_id = '" . (int)$attribute_values['products_options_values_id'] . "'";

 

$attribute_values_price_values = tep_db_query($attribute_values_price_query);

 

$attribute_values_price = tep_db_fetch_array($attribute_values_price_values);

 

$row['v_attribute_values_price_' . $attribute_options_count . '_' . $attribute_values_count] = $attribute_values_price['price_prefix'] . $attribute_values_price['options_values_price'];

 

for ($i=0, $n=sizeof($languages); $i<$n; $i++) {

$lid = $languages[$i]['id'];

 

$attribute_values_languages_query = "select products_options_values_name from " . TABLE_PRODUCTS_OPTIONS_VALUES . " where products_options_values_id = '" . (int)$attribute_values['products_options_values_id'] . "' and language_id = '" . (int)$lid . "'";

 

$attribute_values_languages_values = tep_db_query($attribute_values_languages_query);

 

$attribute_values_languages = tep_db_fetch_array($attribute_values_languages_values);

 

$row['v_attribute_values_name_' . $attribute_options_count . '_' . $attribute_values_count . '_' . $lid] = $attribute_values_languages['products_options_values_name'];

}

 

$attribute_values_count++;

}

 

$attribute_options_count++;

}

}

// VJ product attribs end

 

// this is for the separate price per customer module

if (isset($filelayout['v_customer_price_1'])){

$sql2 = "SELECT

customers_group_price,

customers_group_id

FROM

".TABLE_PRODUCTS_GROUPS."

WHERE

products_id = " . $row['v_products_id'] . "

ORDER BY

customers_group_id"

;

$result2 = tep_db_query($sql2);

$ll = 1;

$row2 = tep_db_fetch_array($result2);

while( $row2 ){

$row['v_customer_group_id_' . $ll] = $row2['customers_group_id'];

$row['v_customer_price_' . $ll] = $row2['customers_group_price'];

$row2 = tep_db_fetch_array($result2);

$ll++;

}

}

if ($dltype == 'froogle'){

// For froogle, we check the specials prices for any applicable specials, and use that price

// by grabbing the specials id descending, we always get the most recently added special price

// I'm checking status because I think you can turn off specials

$sql2 = "SELECT

specials_new_products_price

FROM

".TABLE_SPECIALS."

WHERE

products_id = " . $row['v_products_id'] . " and

status = 1 and

expires_date < CURRENT_TIMESTAMP

ORDER BY

specials_id DESC"

;

$result2 = tep_db_query($sql2);

$ll = 1;

$row2 = tep_db_fetch_array($result2);

if( $row2 ){

// reset the products price to our special price if there is one for this product

$row['v_products_price'] = $row2['specials_new_products_price'];

}

}

 

//elari -

//We check the value of tax class and title instead of the id

//Then we add the tax to price if $price_with_tax is set to 1

$row_tax_multiplier = tep_get_tax_class_rate($row['v_tax_class_id']);

$row['v_tax_class_title'] = tep_get_tax_class_title($row['v_tax_class_id']);

$row['v_products_price'] = $row['v_products_price'] +

($price_with_tax * round($row['v_products_price'] * $row_tax_multiplier / 100,2));

 

 

// Now set the status to a word the user specd in the config vars

if ( $row['v_status'] == '1' ){

$row['v_status'] = $active;

} else {

$row['v_status'] = $inactive;

}

 

// remove any bad things in the texts that could confuse EasyPopulate

$therow = '';

foreach( $filelayout as $key => $value ){

//echo "The field was $key<br>";

 

$thetext = $row[$key];

// kill the carriage returns and tabs in the descriptions, they're killing me!

$thetext = str_replace("\r",' ',$thetext);

$thetext = str_replace("\n",' ',$thetext);

$thetext = str_replace("\t",' ',$thetext);

// and put the text into the output separated by tabs

$therow .= $thetext . $separator;

}

 

// lop off the trailing tab, then append the end of row indicator

$therow = substr($therow,0,strlen($therow)-1) . $endofrow;

 

$filestring .= $therow;

// grab the next row from the db

$row = tep_db_fetch_array($result);

}

 

#$EXPORT_TIME=time();

$EXPORT_TIME = strftime('%Y%b%d-%H%I');

if ($dltype=="froogle"){

$EXPORT_TIME = "FroogleEP" . $EXPORT_TIME;

} else {

$EXPORT_TIME = "EP" . $EXPORT_TIME;

}

 

// now either stream it to them or put it in the temp directory

if ($download == 'stream'){

//*******************************

// STREAM FILE

//*******************************

header("Content-type: application/vnd.ms-excel");

header("Content-disposition: attachment; filename=$EXPORT_TIME.txt");

header("Pragma: no-cache");

header("Expires: 0");

echo $filestring;

die();

} else {

//*******************************

// PUT FILE IN TEMP DIR

//*******************************

$tmpfname = DIR_FS_DOCUMENT_ROOT . $tempdir . "$EXPORT_TIME.txt";

//unlink($tmpfname);

$fp = fopen( $tmpfname, "w+");

fwrite($fp, $filestring);

fclose($fp);

echo "You can get your file in the Tools/Files under " . $tempdir . "EP" . $EXPORT_TIME . ".txt";

die();

}

} // *** END *** download section

?>

 

<!doctype html public "-//W3C//DTD HTML 4.01 Transitional//EN">

<html <?php echo HTML_PARAMS; ?>>

<head>

<meta http-equiv="Content-Type" content="text/html; charset=<?php echo CHARSET; ?>">

<title><?php echo TITLE; ?></title>

<link rel="stylesheet" type="text/css" href="includes/stylesheet.css">

</head>

<body marginwidth="0" marginheight="0" topmargin="0" bottommargin="0" leftmargin="0" rightmargin="0" bgcolor="#FFFFFF">

<?php require(DIR_WS_INCLUDES . 'header.php'); ?>

 

<table border="0" width="100%" cellspacing="2" cellpadding="2">

<tr>

<td width="<?php echo BOX_WIDTH; ?>" valign="top" height="27">

<table border="0" width="<?php echo BOX_WIDTH; ?>" cellspacing="1" cellpadding="1" class="columnLeft">

<?php require(DIR_WS_INCLUDES . 'column_left.php');?>

</table></td>

<td class="pageHeading" valign="top"><?php

echo "Easy Populate $curver - Default Language : " . $epdlanguage_name . '(' . $epdlanguage_id .')' ;

?>

 

<p class="smallText">

 

<?php

 

if ($localfile or (is_uploaded_file($usrfl) && $split==0)) {

//*******************************

//*******************************

// UPLOAD AND INSERT FILE

//*******************************

//*******************************

 

if ($usrfl){

// move the file to where we can work with it

$file = tep_get_uploaded_file('usrfl');

if (is_uploaded_file($file['tmp_name'])) {

tep_copy_uploaded_file($file, DIR_FS_DOCUMENT_ROOT . $tempdir);

}

 

echo "<p class=smallText>";

echo "File uploaded. <br>";

echo "Temporary filename: " . $usrfl . "<br>";

echo "User filename: " . $usrfl_name . "<br>";

echo "Size: " . $usrfl_size . "<br>";

 

// get the entire file into an array

$readed = file(DIR_FS_DOCUMENT_ROOT . $tempdir . $usrfl_name);

}

if ($localfile){

// move the file to where we can work with it

$file = tep_get_uploaded_file('usrfl'); $attribute_options_query = "select distinct products_options_id from " . TABLE_PRODUCTS_OPTIONS . " order by products_options_id";

 

$attribute_options_values = tep_db_query($attribute_options_query);

 

$attribute_options_count = 1;

//while ($attribute_options = tep_db_fetch_array($attribute_options_values)){

if (is_uploaded_file($file['tmp_name'])) {

tep_copy_uploaded_file($file, DIR_FS_DOCUMENT_ROOT . $tempdir);

}

 

echo "<p class=smallText>";

echo "Filename: " . $localfile . "<br>";

 

// get the entire file into an array

$readed = file(DIR_FS_DOCUMENT_ROOT . $tempdir . $localfile);

}

 

// now we string the entire thing together in case there were carriage returns in the data

$newreaded = "";

foreach ($readed as $read){

$newreaded .= $read;

}

 

// now newreaded has the entire file together without the carriage returns.

// if for some reason excel put qoutes around our EOREOR, remove them then split into rows

$newreaded = str_replace('"EOREOR"', 'EOREOR', $newreaded);

$readed = explode( $separator . 'EOREOR',$newreaded);

 

 

// Now we'll populate the filelayout based on the header row.

$theheaders_array = explode( $separator, $readed[0] ); // explode the first row, it will be our filelayout

$lll = 0;

$filelayout = array();

foreach( $theheaders_array as $header ){

$cleanheader = str_replace( '"', '', $header);

// echo "Fileheader was $header<br><br><br>";

$filelayout[ $cleanheader ] = $lll++; //

}

unset($readed[0]); // we don't want to process the headers with the data

 

// now we've got the array broken into parts by the expicit end-of-row marker.

array_walk($readed, 'walk');

 

}

 

if (is_uploaded_file($usrfl) && $split==1) {

//*******************************

//*******************************

// UPLOAD AND SPLIT FILE

//*******************************

//*******************************

// move the file to where we can work with it

$file = tep_get_uploaded_file('usrfl');

//echo "Trying to move file...";

if (is_uploaded_file($file['tmp_name'])) {

tep_copy_uploaded_file($file, DIR_FS_DOCUMENT_ROOT . $tempdir);

}

 

$infp = fopen(DIR_FS_DOCUMENT_ROOT . $tempdir . $usrfl_name, "r");

 

//toprow has the field headers

$toprow = fgets($infp,32768);

 

$filecount = 1;

 

echo "Creating file EP_Split" . $filecount . ".txt ... ";

$tmpfname = DIR_FS_DOCUMENT_ROOT . $tempdir . "EP_Split" . $filecount . ".txt";

$fp = fopen( $tmpfname, "w+");

fwrite($fp, $toprow);

 

$linecount = 0;

$line = fgets($infp,32768);

while ($line){

// walking the entire file one row at a time

// but a line is not necessarily a complete row, we need to split on rows that have "EOREOR" at the end

$line = str_replace('"EOREOR"', 'EOREOR', $line);

fwrite($fp, $line);

if (strpos($line, 'EOREOR')){

// we found the end of a line of data, store it

$linecount++; // increment our line counter

if ($linecount >= $maxrecs){

echo "Added $linecount records and closing file... <Br>";

$linecount = 0; // reset our line counter

// close the existing file and open another;

fclose($fp);

// increment filecount

$filecount++;

echo "Creating file EP_Split" . $filecount . ".txt ... ";

$tmpfname = DIR_FS_DOCUMENT_ROOT . $tempdir . "EP_Split" . $filecount . ".txt";

//Open next file name

$fp = fopen( $tmpfname, "w+");

fwrite($fp, $toprow);

}

}

$line=fgets($infp,32768);

}

echo "Added $linecount records and closing file...<br><br> ";

fclose($fp);

fclose($infp);

 

echo "You can download your split files in the Tools/Files under /catalog/temp/";

 

}

 

?>

</p>

 

<table width="75%" border="2">

<tr>

<td width="75%">

<FORM ENCTYPE="multipart/form-data" ACTION="easypopulate.php?split=0" METHOD=POST>

<p>

<div align = "left">

<p><b>Upload EP File</b></p>

<p>

<INPUT TYPE="hidden" name="MAX_FILE_SIZE" value="100000000">

<p></p>

<input name="usrfl" type="file" size="50">

<input type="submit" name="buttoninsert" value="Insert into db"><br>

</p>

</div>

 

</form>

 

<FORM ENCTYPE="multipart/form-data" ACTION="easypopulate.php?split=1" METHOD=POST>

<p>

<div align = "left">

<p><b>Split EP File</b></p>

<p>

<INPUT TYPE="hidden" name="MAX_FILE_SIZE" value="1000000000">

<p></p>

<input name="usrfl" type="file" size="50">

<input type="submit" name="buttonsplit" value="Split file"><br>

</p>

</div>

 

</form>

 

<FORM ENCTYPE="multipart/form-data" ACTION="easypopulate.php" METHOD=POST>

<p>

<div align = "left">

<p><b>Import from Temp Dir (<? echo $tempdir; ?>)</b></p>

<p class="smallText">

<INPUT TYPE="text" name="localfile" size="50">

<input type="submit" name="buttoninsert" value="Insert into db"><br>

</p>

</div>

 

</form>

 

 

 

 

<p><b>Download EP and Froogle Files</b></p>

 

<!-- Download file links - Add your custom fields here -->

<a href="easypopulate.php?download=stream&dltype=full">Download <b>Complete</b> tab-delimited .txt file to edit</a><br>

<a href="easypopulate.php?download=stream&dltype=priceqty">Download <b>Model/Price/Qty</b> tab-delimited .txt file to edit</a><br>

<a href="easypopulate.php?download=stream&dltype=category">Download <b>Model/Category</b> tab-delimited .txt file to edit</a><br>

<a href="easypopulate.php?download=stream&dltype=froogle">Download <b>Froogle</b> tab-delimited .txt file</a><br>

 

<!-- VJ product attributes begin //-->

<?php

if ($products_with_attributes == true) {

?>

<a href="easypopulate.php?download=stream&dltype=attrib">Download <b>Model/Attributes</b> tab-delimited .txt file</a><br>

<?php

}

?>

<!-- VJ product attributes end //-->

 

<p><b>Create EP and Froogle Files in Temp Dir (<? echo $tempdir; ?>)</b></p>

<a href="easypopulate.php?download=tempfile&dltype=full">Create Complete tab-delimited .txt file in temp dir</a><br>

<a href="easypopulate.php?download=tempfile&dltype=priceqty"">Create Model/Price/Qty tab-delimited .txt file in temp dir</a><br>

<a href="easypopulate.php?download=tempfile&dltype=category">Create Model/Category tab-delimited .txt file in temp dir</a><br>

<a href="easypopulate.php?download=tempfile&dltype=froogle">Create Froogle tab-delimited .txt file in temp dir</a><br>

 

<!-- VJ product attributes begin //-->

<a href="easypopulate.php?download=tempfile&dltype=attrib">Create Model/Attributes tab-delimited .txt file in temp dir</a><br>

<!-- VJ product attributes end //-->

 

</td>

</tr>

</table>

</td>

</tr>

</table>

 

<?php require(DIR_WS_INCLUDES . 'footer.php'); ?>

 

<p> </p>

<p> </p><p><br>

</p></body>

</html>

 

<?php

 

function ep_get_languages() {

$languages_query = tep_db_query("select languages_id, code from " . TABLE_LANGUAGES . " order by sort_order");

// start array at one, the rest of the code expects it that way

$ll =1;

while ($ep_languages = tep_db_fetch_array($languages_query)) {

//will be used to return language_id en language code to report in product_name_code instead of product_name_id

$ep_languages_array[$ll++] = array(

'id' => $ep_languages['languages_id'],

'code' => $ep_languages['code']

);

}

return $ep_languages_array;

};

 

function tep_get_tax_class_rate($tax_class_id) {

$tax_multiplier = 0;

$tax_query = tep_db_query("select SUM(tax_rate) as tax_rate from " . TABLE_TAX_RATES . " WHERE tax_class_id = '" . $tax_class_id . "' GROUP BY tax_priority");

if (tep_db_num_rows($tax_query)) {

while ($tax = tep_db_fetch_array($tax_query)) {

$tax_multiplier += $tax['tax_rate'];

}

}

return $tax_multiplier;

};

 

function tep_get_tax_title_class_id($tax_class_title) {

$classes_query = tep_db_query("select tax_class_id from " . TABLE_TAX_CLASS . " WHERE tax_class_title = '" . $tax_class_title . "'" );

$tax_class_array = tep_db_fetch_array($classes_query);

$tax_class_id = $tax_class_array['tax_class_id'];

return $tax_class_id ;

}

 

function print_el( $item2 ) {

echo " | " . substr(strip_tags($item2), 0, 10);

};

 

function print_el1( $item2 ) {

echo sprintf("| %'.4s ", substr(strip_tags($item2), 0, 80));

};

function ep_create_filelayout($dltype){

global $filelayout, $filelayout_count, $filelayout_sql, $langcode, $fileheaders, $max_categories;

// depending on the type of the download the user wanted, create a file layout for it.

$fieldmap = array(); // default to no mapping to change internal field names to external.

switch( $dltype ){

case 'full':

// The file layout is dynamically made depending on the number of languages

$iii = 0;

$filelayout = array(

'v_products_model' => $iii++,

'v_products_image' => $iii++,

);

 

foreach ($langcode as $key => $lang){

$l_id = $lang['id'];

// uncomment the head_title, head_desc, and head_keywords to use

// Linda's Header Tag Controller 2.0

//echo $langcode['id'] . $langcode['code'];

$filelayout = array_merge($filelayout , array(

'v_products_name_' . $l_id => $iii++,

'v_products_description_' . $l_id => $iii++,

'v_products_url_' . $l_id => $iii++,

// 'v_products_head_title_tag_'.$l_id => $iii++,

// 'v_products_head_desc_tag_'.$l_id => $iii++,

// 'v_products_head_keywords_tag_'.$l_id => $iii++,

));

}

 

 

// uncomment the customer_price and customer_group to support multi-price per product contrib

 

// VJ product attribs begin

$header_array = array(

'v_products_price' => $iii++,

'v_products_weight' => $iii++,

'v_date_avail' => $iii++,

'v_date_added' => $iii++,

'v_products_quantity' => $iii++,

'v_products_master' => $iii++,

'v_products_master_status' => $iii++,

'v_products_listing_status' => $iii++,

);

 

$languages = tep_get_languages();

 

global $attribute_options_array;

 

$attribute_options_count = 1;

foreach ($attribute_options_array as $attribute_options_values) {

$key1 = 'v_attribute_options_id_' . $attribute_options_count;

$header_array[$key1] = $iii++;

 

for ($i=0, $n=sizeof($languages); $i<$n; $i++) {

$l_id = $languages[$i]['id'];

 

$key2 = 'v_attribute_options_name_' . $attribute_options_count . '_' . $l_id;

$header_array[$key2] = $iii++;

}

 

$attribute_values_query = "select products_options_values_id from " . TABLE_PRODUCTS_OPTIONS_VALUES_TO_PRODUCTS_OPTIONS . " where products_options_id = '" . (int)$attribute_options_values['products_options_id'] . "' order by products_options_values_id";

 

$attribute_values_values = tep_db_query($attribute_values_query);

 

$attribute_values_count = 1;

while ($attribute_values = tep_db_fetch_array($attribute_values_values)) {

$key3 = 'v_attribute_values_id_' . $attribute_options_count . '_' . $attribute_values_count;

$header_array[$key3] = $iii++;

 

$key4 = 'v_attribute_values_price_' . $attribute_options_count . '_' . $attribute_values_count;

$header_array[$key4] = $iii++;

 

for ($i=0, $n=sizeof($languages); $i<$n; $i++) {

$l_id = $languages[$i]['id'];

 

$key5 = 'v_attribute_values_name_' . $attribute_options_count . '_' . $attribute_values_count . '_' . $l_id;

$header_array[$key5] = $iii++;

}

 

$attribute_values_count++;

}

 

$attribute_options_count++;

}

 

$header_array['v_manufacturers_name'] = $iii++;

 

$filelayout = array_merge($filelayout, $header_array);

// VJ product attribs end

 

// build the categories name section of the array based on the number of categores the user wants to have

for($i=1;$i<$max_categories+1;$i++){

$filelayout = array_merge($filelayout, array('v_categories_name_' . $i => $iii++));

}

 

$filelayout = array_merge($filelayout, array(

'v_tax_class_title' => $iii++,

'v_status' => $iii++,

));

 

$filelayout_sql = "SELECT

p.products_id as v_products_id,

p.products_model as v_products_model,

p.products_image as v_products_image,

p.products_price as v_products_price,

p.products_weight as v_products_weight,

p.products_master as v_products_master,

p.products_master_status as v_products_master_status,

p.products_listing_status as v_products_listing_status,

p.products_date_available as v_date_avail,

p.products_date_added as v_date_added,

p.products_tax_class_id as v_tax_class_id,

p.products_quantity as v_products_quantity,

p.manufacturers_id as v_manufacturers_id,

subc.categories_id as v_categories_id,

p.products_status as v_status

FROM

".TABLE_PRODUCTS." as p,

".TABLE_CATEGORIES." as subc,

".TABLE_PRODUCTS_TO_CATEGORIES." as ptoc

WHERE

p.products_id = ptoc.products_id AND

ptoc.categories_id = subc.categories_id

";

 

break;

case 'priceqty':

$iii = 0;

// uncomment the customer_price and customer_group to support multi-price per product contrib

$filelayout = array(

'v_products_model' => $iii++,

'v_products_price' => $iii++,

'v_products_quantity' => $iii++,

#'v_customer_price_1' => $iii++,

#'v_customer_group_id_1' => $iii++,

#'v_customer_price_2' => $iii++,

#'v_customer_group_id_2' => $iii++,

#'v_customer_price_3' => $iii++,

#'v_customer_group_id_3' => $iii++,

#'v_customer_price_4' => $iii++,

#'v_customer_group_id_4' => $iii++,

);

$filelayout_sql = "SELECT

p.products_id as v_products_id,

p.products_model as v_products_model,

p.products_price as v_products_price,

p.products_quantity as v_products_quantity

FROM

".TABLE_PRODUCTS." as p

";

 

break;

 

case 'category':

// The file layout is dynamically made depending on the number of languages

$iii = 0;

$filelayout = array(

'v_products_model' => $iii++,

);

 

// build the categories name section of the array based on the number of categores the user wants to have

for($i=1;$i<$max_categories+1;$i++){

$filelayout = array_merge($filelayout, array('v_categories_name_' . $i => $iii++));

}

 

 

$filelayout_sql = "SELECT

p.products_id as v_products_id,

p.products_model as v_products_model,

subc.categories_id as v_categories_id

FROM

".TABLE_PRODUCTS." as p,

".TABLE_CATEGORIES." as subc,

".TABLE_PRODUCTS_TO_CATEGORIES." as ptoc

WHERE

p.products_id = ptoc.products_id AND

ptoc.categories_id = subc.categories_id

";

break;

 

case 'froogle':

// this is going to be a little interesting because we need

// a way to map from internal names to external names

//

// Before it didn't matter, but with froogle needing particular headers,

// The file layout is dynamically made depending on the number of languages

$iii = 0;

$filelayout = array(

'v_froogle_products_url_1' => $iii++,

);

//

// here we need to get the default language and put

$l_id = 1; // dummy it in for now.

// foreach ($langcode as $key => $lang){

// $l_id = $lang['id'];

$filelayout = array_merge($filelayout , array(

'v_froogle_products_name_' . $l_id => $iii++,

'v_froogle_products_description_' . $l_id => $iii++,

));

// }

$filelayout = array_merge($filelayout , array(

'v_products_price' => $iii++,

'v_products_fullpath_image' => $iii++,

'v_category_fullpath' => $iii++,

'v_froogle_offer_id' => $iii++,

'v_froogle_instock' => $iii++,

'v_froogle_ shipping' => $iii++,

'v_manufacturers_name' => $iii++,

'v_froogle_ upc' => $iii++,

'v_froogle_color' => $iii++,

'v_froogle_size' => $iii++,

'v_froogle_quantitylevel' => $iii++,

'v_froogle_product_id' => $iii++,

'v_froogle_manufacturer_id' => $iii++,

'v_froogle_exp_date' => $iii++,

'v_froogle_product_type' => $iii++,

'v_froogle_delete' => $iii++,

'v_froogle_currency' => $iii++,

));

$iii=0;

$fileheaders = array(

'product_url' => $iii++,

'name' => $iii++,

'description' => $iii++,

'price' => $iii++,

'image_url' => $iii++,

'category' => $iii++,

'offer_id' => $iii++,

'instock' => $iii++,

'shipping' => $iii++,

'brand' => $iii++,

'upc' => $iii++,

'color' => $iii++,

'size' => $iii++,

'quantity' => $iii++,

'product_id' => $iii++,

'manufacturer_id' => $iii++,

'exp_date' => $iii++,

'product_type' => $iii++,

'delete' => $iii++,

'currency' => $iii++,

);

$filelayout_sql = "SELECT

p.products_id as v_products_id,

p.products_model as v_products_model,

p.products_image as v_products_image,

p.products_price as v_products_price,

p.products_weight as v_products_weight,

p.products_master as v_products_master,

p.products_master_status as v_products_master_status,

p.products_listing_status as v_products_listing_status,

p.products_date_added as v_date_avail,

p.products_tax_class_id as v_tax_class_id,

p.products_quantity as v_products_quantity,

p.manufacturers_id as v_manufacturers_id,

subc.categories_id as v_categories_id

FROM

".TABLE_PRODUCTS." as p,

".TABLE_CATEGORIES." as subc,

".TABLE_PRODUCTS_TO_CATEGORIES." as ptoc

WHERE

p.products_id = ptoc.products_id AND

ptoc.categories_id = subc.categories_id

";

break;

 

// VJ product attributes begin

case 'attrib':

$iii = 0;

$filelayout = array(

'v_products_model' => $iii++

);

 

$header_array = array();

 

$languages = tep_get_languages();

 

global $attribute_options_array;

 

$attribute_options_count = 1;

foreach ($attribute_options_array as $attribute_options_values) {

$key1 = 'v_attribute_options_id_' . $attribute_options_count;

$header_array[$key1] = $iii++;

 

for ($i=0, $n=sizeof($languages); $i<$n; $i++) {

$l_id = $languages[$i]['id'];

 

$key2 = 'v_attribute_options_name_' . $attribute_options_count . '_' . $l_id;

$header_array[$key2] = $iii++;

}

 

$attribute_values_query = "select products_options_values_id from " . TABLE_PRODUCTS_OPTIONS_VALUES_TO_PRODUCTS_OPTIONS . " where products_options_id = '" . (int)$attribute_options_values['products_options_id'] . "' order by products_options_values_id";

 

$attribute_values_values = tep_db_query($attribute_values_query);

 

$attribute_values_count = 1;

while ($attribute_values = tep_db_fetch_array($attribute_values_values)) {

$key3 = 'v_attribute_values_id_' . $attribute_options_count . '_' . $attribute_values_count;

$header_array[$key3] = $iii++;

 

$key4 = 'v_attribute_values_price_' . $attribute_options_count . '_' . $attribute_values_count;

$header_array[$key4] = $iii++;

 

for ($i=0, $n=sizeof($languages); $i<$n; $i++) {

$l_id = $languages[$i]['id'];

 

$key5 = 'v_attribute_values_name_' . $attribute_options_count . '_' . $attribute_values_count . '_' . $l_id;

$header_array[$key5] = $iii++;

}

 

$attribute_values_count++;

}

 

$attribute_options_count++;

}

 

$filelayout = array_merge($filelayout, $header_array);

 

$filelayout_sql = "SELECT

p.products_id as v_products_id,

p.products_model as v_products_model

FROM

".TABLE_PRODUCTS." as p

";

 

break;

// VJ product attributes end

}

$filelayout_count = count($filelayout);

 

}

 

 

function walk( $item1 ) {

global $filelayout, $filelayout_count, $modelsize;

global $active, $inactive, $langcode, $default_these, $deleteit, $zero_qty_inactive;

global $epdlanguage_id, $price_with_tax, $replace_quotes;

global $default_images, $default_image_manufacturer, $default_image_product, $default_image_category;

global $separator, $max_categories;

// first we clean up the row of data

 

// chop blanks from each end

$item1 = ltrim(rtrim($item1));

 

// blow it into an array, splitting on the tabs

$items = explode($separator, $item1);

 

// make sure all non-set things are set to '';

// and strip the quotes from the start and end of the stings.

// escape any special chars for the database.

foreach( $filelayout as $key=> $value){

$i = $filelayout[$key];

if (isset($items[$i]) == false) {

$items[$i]='';

} else {

// Check to see if either of the magic_quotes are turned on or off;

// And apply filtering accordingly.

if (function_exists('ini_get')) {

//echo "Getting ready to check magic quotes<br>";

if (ini_get('magic_quotes_runtime') == 1){

// The magic_quotes_runtime are on, so lets account for them

// check if the last character is a quote;

// if it is, chop off the quotes.

if (substr($items[$i],-1) == '"'){

$items[$i] = substr($items[$i],2,strlen($items[$i])-4);

}

// now any remaining doubled double quotes should be converted to one doublequote

$items[$i] = str_replace('\"\"',""",$items[$i]);

if ($replace_quotes){

$items[$i] = str_replace('\"',""",$items[$i]);

$items[$i] = str_replace("\'","'",$items[$i]);

}

} else { // no magic_quotes are on

// check if the last character is a quote;

// if it is, chop off the 1st and last character of the string.

if (substr($items[$i],-1) == '"'){

$items[$i] = substr($items[$i],1,strlen($items[$i])-2);

}

// now any remaining doubled double quotes should be converted to one doublequote

$items[$i] = str_replace('""',""",$items[$i]);

if ($replace_quotes){

$items[$i] = str_replace('"',""",$items[$i]);

$items[$i] = str_replace("'","'",$items[$i]);

}

}

}

}

}

/*

if ( $items['v_status'] == $deleteit ){

// they want to delete this product.

echo "Deleting product " . $items['v_products_model'] . " from the database<br>";

// Get the ID

 

// kill in the products_to_categories

 

// Kill in the products table

 

return; // we're done deleteing!

}

*/

// now do a query to get the record's current contents

$sql = "SELECT

p.products_id as v_products_id,

p.products_model as v_products_model,

p.products_image as v_products_image,

p.products_price as v_products_price,

p.products_weight as v_products_weight,

p.products_master as v_products_master,

p.products_master_status as v_products_master_status,

p.products_listing_status as v_products_listing_status,

p.products_date_added as v_date_avail,

p.products_tax_class_id as v_tax_class_id,

p.products_quantity as v_products_quantity,

p.manufacturers_id as v_manufacturers_id,

subc.categories_id as v_categories_id

FROM

".TABLE_PRODUCTS." as p,

".TABLE_CATEGORIES." as subc,

".TABLE_PRODUCTS_TO_CATEGORIES." as ptoc

WHERE

p.products_id = ptoc.products_id AND

p.products_model = '" . $items[$filelayout['v_products_model']] . "' AND

ptoc.categories_id = subc.categories_id

";

 

$result = tep_db_query($sql);

$row = tep_db_fetch_array($result);

 

 

while ($row){

// OK, since we got a row, the item already exists.

// Let's get all the data we need and fill in all the fields that need to be defaulted to the current values

// for each language, get the description and set the vals

foreach ($langcode as $key => $lang){

//echo "Inside defaulting loop";

//echo "key is $key<br>";

//echo "langid is " . $lang['id'] . "<br>";

// $sql2 = "SELECT products_name, products_description

// FROM ".TABLE_PRODUCTS_DESCRIPTION."

// WHERE

// products_id = " . $row['v_products_id'] . " AND

// language_id = '" . $lang['id'] . "'

// ";

$sql2 = "SELECT *

FROM ".TABLE_PRODUCTS_DESCRIPTION."

WHERE

products_id = " . $row['v_products_id'] . " AND

language_id = '" . $lang['id'] . "'

";

$result2 = tep_db_query($sql2);

$row2 = tep_db_fetch_array($result2);

// Need to report from ......_name_1 not ..._name_0

$row['v_products_name_' . $lang['id']] = $row2['products_name'];

$row['v_products_des

Link to comment
Share on other sites

what do you mean after the file is uploaded? is this after splitting and prior to importing into the database? the files will go to catalog/temp . . .

Link to comment
Share on other sites

is your store in /catalog or is it in your root? could you send me a link to your store (post it in here).

 

this is what needs to be set properly

 

// **** Temp directory ****

// if you changed your directory structure from stock and do not have /catalog/temp/, then you'll need to change this accordingly.

//

$tempdir = "/temp/";

$tempdir2 = "/temp/";

 

if using catalog then /catalog/temp/

if store then /store/temp/

if in the root then as you have it

Link to comment
Share on other sites

you will have to look in the temp folder to see if it is indeed there. are you trying to upload the products into the database? how many products are you trying to add?

did the products get added to the store? i am at a loss of what you mean by uploading, from the ep menu or via file manager?

Link to comment
Share on other sites

I know the file is definitely in the temp folder. I am trying to upload 109 products into my store catalog. As far as the products being added to the store, I don't see them. That's my problem. I am uploading from the EP menu. There is an option to "Import from Temp Dir", I used that option.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...