Pirulo908 Posted November 20, 2009 Share Posted November 20, 2009 Hi, im not english, excuse me. How can i show product with stock = 0 ? Thank you ! Quote Link to comment Share on other sites More sharing options...
maumauns Posted November 27, 2009 Share Posted November 27, 2009 Hi, Im from Brazil I would like to know, how change the exibition of prices Because here in Brazil it's different from the others countries decimal point: , thousands point: . How can I change this part?? Quote Link to comment Share on other sites More sharing options...
maumauns Posted November 27, 2009 Share Posted November 27, 2009 i have a problem, i install the version 2.5.5 but the product doesn't apear to selct them, pear only please wait ... loading please test here http://www.altshop.ro/compbuild.php Hi man I really like ur special's addon Where did u find it? Quote Link to comment Share on other sites More sharing options...
senatorman Posted December 7, 2009 Share Posted December 7, 2009 (edited) This is a very great contribution. If installed and after solving a few bugs, it works fine now. But there is one thing that works not good for my shop. My shop has this structure: Category > 1e-subcategory > 2e-subcategory Like: Processors(category) ___Intel-Socket-775(1e-subcategory) ______Single-Core(2e-subcategory) ______Dual-core(2e-subcategory) ______Quad-core(2e-subcategory) ___AMD-Socket-AM3 ______Single-Core ______Dual-Core ______Quad-Core The problem is that in the builder the (1e-subcategory)is the first of selection. How can i change this, that the first of selection is the (category). On this way it's possible to make an AMD or Intel system Can someone tell me how to change? Edited December 7, 2009 by senatorman Quote Link to comment Share on other sites More sharing options...
TAC_CIO Posted December 28, 2009 Share Posted December 28, 2009 This is a very great contribution. If installed and after solving a few bugs, it works fine now. But there is one thing that works not good for my shop. My shop has this structure: Category > 1e-subcategory > 2e-subcategory Like: Processors(category) ___Intel-Socket-775(1e-subcategory) ______Single-Core(2e-subcategory) ______Dual-core(2e-subcategory) ______Quad-core(2e-subcategory) ___AMD-Socket-AM3 ______Single-Core ______Dual-Core ______Quad-Core The problem is that in the builder the (1e-subcategory)is the first of selection. How can i change this, that the first of selection is the (category). On this way it's possible to make an AMD or Intel system Can someone tell me how to change? I am having the same problem I have a Processors->Intel & AMD subcategories. I can see either subcategory but not both. When I have just the Processors Category selected, I just see AMD Options & Intel Options but no Product. Quote Link to comment Share on other sites More sharing options...
Guest Posted January 31, 2010 Share Posted January 31, 2010 Hi everybody I did install thid contribution, it is working well, I just would like to arrange the display a little bit. I did try different thing but cannot find it. To have an idea this is the page with the contribution here I would like to change the categories and put them horizontal. So it will be like this Categories1 Categories 2 Categories 3 etc..... Also i would like to add the button "Add to Basket" in each categorie ( next to the button "info") So once you select a product you can add straight in the basket. If someone knows where top change this ( compbuild.php ou prduct_list) please let me know. Thank you Bastien Quote Link to comment Share on other sites More sharing options...
madmaxx Posted March 15, 2010 Share Posted March 15, 2010 UPDATE http://addons.oscommerce.com/info/3282 The reason for this release is for firefox ***print preview: - total price and add to cart in the older version, the cart was empty ################################# ############################################### UPDATE INSTRUCTION FROM version 2.5.5 TO 2.5.6 ############################################################## Just replace /catalog/build/builder2.php NB: Full Package Quote Link to comment Share on other sites More sharing options...
kep@ Posted March 22, 2010 Share Posted March 22, 2010 Hello everyone PC Pro Creator is an excellent The only problem that I encountered is: prduct_list.php does not display correctly price products that are on special offer Quote Link to comment Share on other sites More sharing options...
SykNET Posted April 19, 2010 Share Posted April 19, 2010 Hi! Are there any possibilities for get PC Pro Creator working with xt commerce? Thanks Stefan Quote Link to comment Share on other sites More sharing options...
pctekcomponents Posted May 6, 2010 Share Posted May 6, 2010 i have a problem, i install the version 2.5.5 but the product doesn't apear to selct them, pear only please wait ... loading please test here http://www.altshop.ro/compbuild.php Im having the same problem. products don't show up to allow selection. Any help would be appreciated. Quote Link to comment Share on other sites More sharing options...
pctekcomponents Posted May 6, 2010 Share Posted May 6, 2010 Ok I got it working. It seems that existing products aren't picked up until you rename the category or move the products to new category. Quote Link to comment Share on other sites More sharing options...
togrok Posted May 19, 2010 Share Posted May 19, 2010 Hello, I installed PC Builder 2.5.6. I want to have AMD and Intel systems. If a customer selects an Intel CPU, then only a motheroard that supports that CPU should be available, but it allows any motherboard to be selected. Any help would be appreciated! Thanks, Bob Sorry for the double post, as I wanted it here and somehow put it as a new thread. Quote Link to comment Share on other sites More sharing options...
togrok Posted May 20, 2010 Share Posted May 20, 2010 Hello, I installed PC Builder 2.5.6. I want to have AMD and Intel systems. If a customer selects an Intel CPU, then only a motheroard that supports that CPU should be available, but it allows any motherboard to be selected. Any help would be appreciated! Thanks, Bob Sorry for the double post, as I wanted it here and somehow put it as a new thread. I finally figured it out. You just click on products next to the dependence category and choose which products go with what. Quote Link to comment Share on other sites More sharing options...
raVen2tt Posted June 9, 2010 Share Posted June 9, 2010 I everybody, I'm having some problems with this contribution, som categories don't display my products, other say I need to choose something else first, but i'm not using dependencies, there is one category that asks me to select that category first, more specifically, when I try to choose a motherboard, I get an error message telling me to select the motherboard first, some of the categories work just fine. Another thing is that my options often get mixed. And the final problem is that the total is always on 0.00€, never goes up. I would really appreciate if someone could help me. Thanks in advance, Tiago Mateus. Quote Link to comment Share on other sites More sharing options...
Peper Posted June 10, 2010 Share Posted June 10, 2010 Is it possible to expand the component list by e.g. putting a "+" sign next to the list for if the customers needs to select a second component from the same category? e.g. for computers components it will show: screen and next to it (click here) - customer selects e.g. 19" screen and needs to select a secondary screen at 22" This will really help my shop Any suggestions or codes please post :thumbsup: Quote Getting the Phoenix off the ground Link to comment Share on other sites More sharing options...
robinneefs Posted August 4, 2010 Share Posted August 4, 2010 Hey, I'm trying to install this contrib. But I'm having a problem in the admin panel, The dropdown boxes ifor Product category and Assembly Fee Category are empty. There are no options i can select. Does anyone know what might cause this? Thanks in advance, Robin Quote Link to comment Share on other sites More sharing options...
Vassilis Posted August 11, 2010 Share Posted August 11, 2010 Hello everybody :-) I installed 2.5.6 version (clean install, wasn't installed before), great contribution, everything works magnificent, except the fact that altough 'Use Dependance' is set to 'Yes', i can not get Dependencies to work. Although i edit dependencies and save while everything seems woking normaly, there are no dependancies set at all while working with building a pc. Any ideas? Quote Link to comment Share on other sites More sharing options...
Andromeda100 Posted August 21, 2010 Share Posted August 21, 2010 Hello, after installing this nice contribution I am wondering about the priceformat. an article costs 0,70 € but in the configurator the price is 070 €. where do I edit the priceformat? Bye Quote Link to comment Share on other sites More sharing options...
Peper Posted September 16, 2010 Share Posted September 16, 2010 Hi everyone I need to configure this addon with SPPC - Separate pricing per customer I need to change the catalog builder code to work with this addon Please if anyone have done this could they post the codes or make an new contribution that includes SPPC Many thanks Quote Getting the Phoenix off the ground Link to comment Share on other sites More sharing options...
JoeB Posted April 3, 2011 Share Posted April 3, 2011 I have not read this complete post on this but does anyone use this add-on for other products besides computers? I have tried the custom product builder and like some of it but want to control the quantities of the items I am building. I am building custom drum sets. So pick a base drum and then you have a choice of picking the lugs, heads, hoops and claws. If my base drum requires 20 lugs and the inventory is below 20 then it will only show the lugs that are above 20. Is this possible? If anyone is using this add-on without any custom modifications for any other products could you post a link please. Quote Link to comment Share on other sites More sharing options...
togrok Posted May 17, 2011 Share Posted May 17, 2011 Hello, Is there a new update for this. Ours stopped working in Firefox, where you can see the drop down, but can't choose anything. Still seems to work fine in Internet Explorer. Thanks, Bob Quote Link to comment Share on other sites More sharing options...
AngelSpeedy Posted September 5, 2011 Share Posted September 5, 2011 Hi guys one question, i use the the Pc Pro Creator 2.5.6, but i want to expand in width the popup window when we made the selection of products, i already found the length number, but i dont find the width number.. Anyone Knows ? The other issue is, i have 3 subcategories in Intel menu, and only appear the AMD products where i have only one subcategorie, but the Intel is minimize and i cant open because i have 3 subcategories.. Any solution for this ?? Link Contrib : http://www.oscommerce.com/community/contributions,3282 Tks.. Quote Link to comment Share on other sites More sharing options...
midiman2525 Posted December 26, 2011 Share Posted December 26, 2011 Hi I need help with step 5 of the install proicedure. The instructions say to replace this function function tep_get_category_tree($parent_id = '0', $spacing = '', $exclude = '', $category_tree_array = '', $include_itself = false) { global $languages_id; if (!is_array($category_tree_array)) $category_tree_array = array(); if ( (sizeof($category_tree_array) < 1) && ($exclude != '0') ) $category_tree_array[] = array('id' => '0', 'text' => TEXT_TOP); if ($include_itself) { $category_query = tep_db_query("select cd.categories_name from " . TABLE_CATEGORIES_DESCRIPTION . " cd where cd.language_id = '" . (int)$languages_id . "' and cd.categories_id = '" . (int)$parent_id . "'"); $category = tep_db_fetch_array($category_query); $category_tree_array[] = array('id' => $parent_id, 'text' => $category['categories_name']); } $categories_query = tep_db_query("select c.categories_id, cd.categories_name, c.parent_id from " . TABLE_CATEGORIES . " c, " . TABLE_CATEGORIES_DESCRIPTION . " cd where c.categories_id = cd.categories_id and cd.language_id = '" . (int)$languages_id . "' and c.parent_id = '" . (int)$parent_id . "' order by c.sort_order, cd.categories_name"); while ($categories = tep_db_fetch_array($categories_query)) { if ($exclude != $categories['categories_id']) $category_tree_array[] = array('id' => $categories['categories_id'], 'text' => $spacing . $categories['categories_name']); $category_tree_array = tep_get_category_tree($categories['categories_id'], $spacing . ' ', $exclude, $category_tree_array); } return $category_tree_array; } With this one function tep_get_subcategories(&$subcategories_array, $parent_id = 0) { $subcategories_query = tep_db_query("select categories_id from " . TABLE_CATEGORIES . " where parent_id = '" . (int)$parent_id . "'"); while ($subcategories = tep_db_fetch_array($subcategories_query)) { $subcategories_array[sizeof($subcategories_array)] = $subcategories['categories_id']; if ($subcategories['categories_id'] != $parent_id) { tep_get_subcategories($subcategories_array, $subcategories['categories_id']); } } } Is that correct because I don't want to mess anything up. Thanks Quote Link to comment Share on other sites More sharing options...
pretendor Posted January 26, 2016 Share Posted January 26, 2016 (edited) Hello, i have downloaded the pc creator pro version 2.5.6 now i the issue that i missing in catalog/includes the column_left.php i'm using oscommerce:v2.3.3.2 need some help cuz i really want to use this script unlikely i have made a real lot of changes in my website and don't want to upgrade cuz i really don't know where i changed everything the last 7 years Edited January 26, 2016 by pretendor Quote Link to comment Share on other sites More sharing options...
♥14steve14 Posted January 26, 2016 Share Posted January 26, 2016 You do not have a column left, but you do have the boxes as modules, so will need to add your code into something similar to those modules. As the addon has not been updated for a while, and this support thread has had no comments since Dec 20122, you may have a lot of work to do to convert this addon to something that will work on the latest version. You may be better off posting in the paid for help section and get someone who knows what they are doing to do the work for you, then release an update for this addon. If you want to learn how to convert this addon so it can be used on the latest version, well done. Quote REMEMBER BACKUP, BACKUP AND BACKUP Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.