Jump to content

BlueLaredo

Members
  • Content count

    49
  • Joined

  • Last visited

1 Follower

Profile Information

  1. BlueLaredo

    coolMenu

    Thanks, Mark. You anticipated my unasked question on the count color. coolMenu is a very nice effect for our needs, especially when we can customize various aspects.
  2. BlueLaredo

    coolMenu

    CoolMenu does indeed work properly and displays all sub-catagories. I was expecting products to also be shown. My designer is requesting this feature but with some sub-catagories containing over 100 products, this may not be practical. Does anyone know how to add products to coolMenu?
  3. BlueLaredo

    coolMenu

    I installed the coolMenu contribution and it works up to a point. Catagory menus will cascade only one level. No sub-catagories appear in the menu. The demo site which was linked in the instructions works fine and produces sub-catagories properly. I've repeated the instructions 3 times now. Can anyone suggest what to check on this?
  4. BlueLaredo

    Multi_Vendor_Shipping new thread

    With a modified version of the "flat.php" from the vendors_shipping folder, I am also using UPS. With just these two options enabled, UPS rates are accurate to the penny. When I try to enable FedEx, error messages ensue so I have disabled that shipping option. At this point, I don't need more than UPS and my customized Flat option for freight item products.
  5. BlueLaredo

    Multi_Vendor_Shipping new thread

    I installed RC4 so the problem I'm reporting may have been fixed in RC5. If I use a modified Flat Rate and UPS, everything works fine. If I add FedEx from the MVS module, error messages occur during the later stage of check out. If a customer orders a product flagged for freight charges, my modified Flat Rate produces a message during the shipping page notifying the customer about the freight charge.
  6. BlueLaredo

    FedEx1 Error

    With both UPS and FedEx enabled for MVS, I get correct rate quotes for both but clicking on the Continue button to go to the Payment Information page causes the following error: Warning: Missing argument 2 for _setservice() in.../catalog/includes/modules/vendors_shipping/fedex1.php on line 308 Warning: Cannot modify header information - headers already sent by (output started at .../catalog/includes/modules/vendors_shipping/fedex1.php:308) in ...catalog/includes/functions/general.php on line 29 With FedEx disabled, there is no error produced.
  7. BlueLaredo

    CVV2 with full details

    I communicated with the author and he sent me the following list of files and the code that should be present in these files. I tracked down each one and found I was missing 6 different spots that were not in the instructions. Here is the list of missing items: - - - - - - - - - admin/includes/classes/order.php: $order_query = tep_db_query("select customers_name, customers_company, customers_street_address, customers_suburb, customers_city, customers_postcode, customers_state, customers_country, customers_telephone, customers_email_address, customers_address_format_id, delivery_name, delivery_company, delivery_street_address, delivery_suburb, delivery_city, delivery_postcode, delivery_state, delivery_country, delivery_address_format_id, billing_name, billing_company, billing_street_address, billing_suburb, billing_city, billing_postcode, billing_state, billing_country, billing_address_format_id, payment_method, cc_type, cc_owner, cc_number, cc_cvv2, cc_expires, currency, currency_value, date_purchased, orders_status, last_modified from " . TABLE_ORDERS . " where orders_id = '" . (int)$order_id . "'"); admin/includes/classes/order.php: 'cc_cvv2' => $order['cc_cvv2'], includes/classes/order.php: $order_query = tep_db_query("select customers_id, customers_name, customers_company, customers_street_address, customers_suburb, customers_city, customers_postcode, customers_state, customers_country, customers_telephone, customers_email_address, customers_address_format_id, delivery_name, delivery_company, delivery_street_address, delivery_suburb, delivery_city, delivery_postcode, delivery_state, delivery_country, delivery_address_format_id, billing_name, billing_company, billing_street_address, billing_suburb, billing_city, billing_postcode, billing_state, billing_country, billing_address_format_id, payment_method, cc_type, cc_owner, cc_number, cc_cvv2, cc_expires, currency, currency_value, date_purchased, orders_status, last_modified from " . TABLE_ORDERS . " where orders_id = '" . (int)$order_id . "'"); includes/classes/order.php: 'cc_cvv2' => $order['cc_cvv2'], includes/classes/order.php: 'cc_cvv2' => (isset($GLOBALS['cc_cvv2']) ? $GLOBALS['cc_cvv2'] : ''), includes/languages/english/modules/payment/cc.php: define('MODULE_PAYMENT_CC_TEXT_CREDIT_CARD_CVV2', 'CVV2: (the 3 or 4 digit //This incomplete line needed appropriate syntax. - - - - - - - - - - Hope that helps.
  8. BlueLaredo

    Multi_Vendor_Shipping new thread

    It now appears I have MVS and Access with Level Account for the Admin Area combined such that UPS shipping rates match to the penny those from the UPS Web site. The following 7 Admin with Level replacement files needed to be modified to include MVS code: admin -> includes -> application_top.php admin -> includes -> column_left.php admin -> includes -> database_tables.php admin -> includes -> filenames.php admin -> includes -> functions -> general.php admin -> includes -> functions -> html_output.php admin -> includes -> languages -> english.php Thanks to Jim Keebaugh/kymation for pointing me in the right direction on this.
  9. BlueLaredo

    MVS and UPS Rate Accuracy

    Unless I've over looked some configuration setting within the MVS contribution, when cross checking UPS shipping charges with the UPS Web site, the MVS contribution charges 18,89 for UPS ground on 23 lbs instead of 13.59. For a 7 lb package, the MVS version charges 10.76 instead of 7.62. And an international shipment to the UK of a 49 lb printer shows 390.92 instead of 262.25. What is really strange, under MVS, the weight is shown as 2 x 22.5 lbs instead of 1 x 45 lbs. When I switch back to the non MVS version, osCommerce calulates correctly in every UPS rate comparison which I've checked. And the same 45 lb printer is shown as 1 x 45 lbs. I'm trying to compare apples to apples with these shipping quotes. Am I missing some setting that could be causing this difference?
  10. BlueLaredo

    Multi_Vendor_Shipping new thread

    Perhaps I spoke too soon on compatibility. In fact, it took me some time to track down the cause of error when combining "Access with Level Account for the Admin Area" with MVS. When inside the Admin and editing a catalog product, the bottom of the page (next to Vendors Comments or Special Instructions) contained the following error message: Fatal error: Call to undefined function: tep_get_vendors_prod_comments() in /Library/WebServer/Documents/catalog/admin/categories.php on line 600 The actual source of error was located in admin-> includes -> functions -> general.php The "Access with Level Account for the Admin Area" contribution has, among other files, a replacement general.php file which does not of course contain any MVS code. I located 4 different MVS sections that I copied and pasted into the replacement general.php file from this Admin Level contribution. I hope there are not other issues yet to be discovered. I offer this information as a guide for others who might make this modification. As always, make a backup copy of your properly functioning catalog folder before trying to combine a contribution.
  11. The "Access with Level Account for the Admin Area" contribution works quite well once I solved a problem for new accounts created beyond the default initial set up account. I searched the forum discussions and found a solution to this problem where one is not given the opportuntiy to enter a password for new accounts beyond the "Top Administrator" account. Since the password was encrypted, trying to view the automatically generated password for a restricted account with phpMyAdmin was not possible. Thinking back now, perhaps I could have cut and pasted the encrypted password when trying to access the secondary account. But even if it worked it would not be a desirable situation. The solution was to allow unencrypted password comparison. I could then manually enter a new account password and then log on to secondary accounts. For me, the "forgot password" mechanism was not available for retieving the automatically assigned password on secondary accounts because these new accounts were not using my own email address. Perhaps I could have used another email address that belongs to me but I did not take this approach.
  12. BlueLaredo

    Multi_Vendor_Shipping new thread

    I have successfully combined "Access with Level Account for the Admin Area" (Admin_Access-2) and "cvv2err_1" (credit card verification number collection) to MVS . In the case of "cvv2err_1" and because I was modifying an almost virgin install of osC (without a previous install of any cvv), simply following the installation instructions did not work. By communicating directly with the author of that contribution, I was able to identify 6 different sections that needed code modification beyond those changes listed in the included install instructions. Regarding "Access with Level Account for the Admin Area", I searched the forum discussions and found a solution to a problem where one is not given the opportuntiy to enter a password for new accounts beyond the "Top Administrator" account. Since the password was encrypted, trying to view the automatically assigned password for a restricted account with phpMyAdmin was not possible. By allowing unencrypted password comparison, I could then manually enter new account passwords and then log on to restricted accounts.
  13. I've added the AdminAccess Level Accounts and set up a password for the default account, the Top Administrator. After a minor modification to the database_tables.php (MVS contribution required this), everything appears to work. Logging on with my email address for Top Administrator allows me complete access, as I would expect. Next I created a new user and assigned that user to a different Group Level. But how do I assign a password to this new user? Of course this new user has a different name and email address. But when creating the new user, I was not given the opportunity to enter a password. When I view the admin table with phpMyAdmin, a password has already been assigned but of course it is encrypted. What is the solution? I cannot click the Forgot Password link when trying to log on with the new account email address since that email address would not send to me. I'm hoping this contribution allows me to set up a restricted admin access for one user to allow just review/edit/print/delete of customers and orders yet also log on to the Top Administrator and have full access.
  14. BlueLaredo

    Admin_Access-2

    I've added the Admin_Access-2 and set up a password for the default account, the Top Administrator. After a minor modification to the database_tables.php (MVS contribution required this), everything appears to work. Logging on with my email address for Top Administrator allows me complete access, as I would expect. Next I created a new user and assigned that user to a different Group Level. But how do I assign a password to this new user? Of course this new user has a different name and email address. But when creating the new user, I was not given the opportunity to enter a password. When I view the admin table with phpMyAdmin, a password has already been assigned but of course it is encrypted. What is the solution? I cannot click the Forgot Password link when trying to log on with the new account email address since that email address would not send to me. I'm hoping this contribution allows me to set up a restricted admin access for one user to allow just review/edit/print/delete of customers and orders yet also log on to the Top Administrator and have full access.
  15. BlueLaredo

    CVV2 with full details

    I have added the "CVV2 with full details" contribution and everything appears to work except the cvv number is not being written to the orders table. The number can be entered and shows up through confirmation. And the number does not show when reviewing the order in Admin. For testing purposes, I have used phpMyAdmin to manually enter a cvv number and then try to use the Admin to review that order. The cvv number is not being displayed. I have successfully added the Multi_Vendor_Shipping contribution so maybe some of those files and the CVV2 files are conflicting. What file is responsible for writting to the orders table and what file handles reading data for display in the Admin for reviewing orders?
×