Jump to content

spoma

Members
  • Content count

    26
  • Joined

  • Last visited

Profile Information

  • Real Name
    Mark
  • Gender
    Male
  1. geoffrey As a test i took two individual products and gave them each the same p.products_model, which when exported became v_products_model. I then edited each of these two lines and imported these two lines back into the system. It worked flawlessly. So, it appears that p.products_model does not need to be unique (which make more sense) but it does need to be populated in a system in order to use Easy Populate. Do you know if there is a specific reason that this field was chosen to be required. I am trying to decide of my best next course of action. I see two options.... 1) Edit easy populate so that it does not require this field populated. Not sure of scope of this project as I haven't looked at the code quite enough. 2) Populate this field in my system with a garbage value and then change the product_info.php page so that it does not display the value on the page Do you agree that these are my options? thanks again for the help.
  2. geoffrey Thanks for the reply. So in looking easypopulate.php it appears that v_products_model is p.products_model. In my system this is blank because I don't use models for our business. Because I don't use the field I am not 100% sure of its use, but I wouldn't think a product model would be unique among all products. I notice that you say 'user facing unique identifier' and I assume you say user facing because the true unique identifier would be p.products_id but that is not user facing. I am just trying to understand how people who don't have product models use this field so that they can use easypopulate. Does it truly expect this field to be unique amongst all products because the only way I see that working is by making it a auto increment number. thanks again for the help and I hope you can give me a little more information to point me in the right direction.
  3. I am running OSCommerce 2.3.4 and I have downloaded EP_v2_9_231.zip and installed it. I am just trying to do a simple test: download a single category, make a change to the description, and then upload into the database I really just want to see how it all works before I start doing the work needed. when I try this simple test I am running into an error complaining about product_model in my file. I can see that v_product_model is empty in the csv file, which I am assuming it is complaining about. The confusion I have is that I don't use the model field in my database and even when I export the file from EP that field is blank. Am I doing something wrong here or is there a different version that doesn't require the model field. I can see in the trouble shooting area of installation instructions it only talks about v_products_model in the Extra Fields Contribution. I don't think I installed this but maybe I have the wrong version. Thanks for any help someone can offer.
  4. I am running version 3.0 of Discount Coupon Codes. The files have been modified from some other add-ons which were added. Because of this I am not able to just drop in modifications but rather have to do a compare and try to pick out what needs to be changed. I am having a problem that I see mentioned frequently in this forum thread but don't see a resolution. I use table based shipping and when the discount applied brings you into a new shipping zone you get caught in a loop where it brings you to checkout_shipping and displays an error of 'Your calculated shipping charges have changed.'. Then you just get stuck in the loop every time you enter the coupon. If anyone could help me with a resolution to this issue I would greatly apprecitate it. Thanks.
  5. spoma

    new Authorize.net AIM setup not working

    Bob Thanks for the response. I had thought of that but I wasn't positive that it was the first 39 values they were giving me so I was concerned that I would end up with things in the wrong field. Usually I am more than willing to play around but I was a little nervous since this is part of the payment area. I will take a look and see if I can find an area to force a partial authorization. I'll let you know what I find. Thanks.
  6. spoma

    new Authorize.net AIM setup not working

    I have done a little more debugging and because count($raw) in my example only hits 39 it is taking the -1 from above and using that is the value of x_response_code. It appears that the code is expecting there to be 54 fields or more in the reply. Is this correct? Should the gateway service be returning 54 fields? Thanks.
  7. spoma

    new Authorize.net AIM setup not working

    OK. So, I have found that $raw[0] is equal to 1 (which is the response code but $response['x_response_code'] is equal to -1. The fact that it is equal to -1 is why I am getting a general error. But, it seems to be coming over as a 1 from the gateway vendor. I am by far not a PHP expert but I notice this code: $response = array('x_response_code' => '-1', 'x_response_subcode' => '-1', 'x_response_reason_code' => '-1'); it almost appears to me that it is setting $response['x_response_code'] to be -1 and immediately following is the error validation on this field. Since it is -1 it goes to the else which is a general error. Any thoughts or direction would be greatly appreciated. Thanks.
  8. spoma

    new Authorize.net AIM setup not working

    I think the -1 in the response code is because the gateway is returning a U and the field can't store a U. Is U a valid entry for the response_code?
  9. spoma

    new Authorize.net AIM setup not working

    As a little more information, I wanted to see what the response code was coming back from the payment gateway. In the case of error=general I added $response['x_response_code'] to also be displayed in the URL. so it appears that the response code coming back is a -1 which doesn't seem correct. I am jus going off the possible values in the case statement and they all seem to be positive numbers. Does anyone know what a -1 might represent?
  10. I am setting up a new website on OSCommerce and the last piece is to get the credit card processing working. This website is replacing a current webstie that I already have so I am already working with a payment gateway. This gateway (plugnpay) supports Authorize.net AIM so I have configured this in my OSCommerce website. I am using the authorize.net (AIM) API version 3.1 My payment gateway has a test credit card that I can use for setting up and debugging. This is the credit card that I am currently using. When I process the credit card through the new website, the payment Gateway sees it as a success and charges the credit card. However, the website displays: ERROR PROCESSING - Please try again and if problem persist, please try another payment method. I see the url is bringing me to ? payment_error=authorizenet_cc_aim&error=general I can't find any errors in logs that I have looked in. I am not sure where to go to start trouble shooting and try to get to the bottom of this. Please let me know if anyone has any information that might help me get further. Thanks.
  11. spoma

    [add-on] Discount Code (support)

    thanks joli1811 I will give that add-on a try tonight and see what happens.
  12. spoma

    [add-on] Discount Code (support)

    This topic is pretty old so I hope I am posting to the correct spot. I am running oscommerce 2.3.1 and I have recently been trying to install Discount code. I first installed version 2.6 and I was able to add the module in admin and configure a code. But, I was not able to get the discount to apply. I then noticed that 3.1.1 was a full install as well and then I could apply the latest update of 3.2. So, I went to my backup and installed version 3.1.1 for osCommerce 2.3.1 Once I did this I am not able to add the module in the administration area. It shows as 2 modules needing to be installed but when I click on them everything in order_total just goes away. I have done a compare of files between version 2.6 and 3.1.1 and I'm not able to find the culprit. Can someone point me in the right direction with this? Thanks.
×