AJRYAN
Pioneers-
Posts
212 -
Joined
-
Last visited
Profile Information
-
Real Name
AJ
- Website
AJRYAN's Achievements
-
orollolati started following AJRYAN
-
No changes Jack, it's just that I only just noticed it. Some cat descriptions are just not showing up I discovered today as I was adding some products.. It's very puzzling. Thanks
-
Hi Jack. I installed this back around the end of summer last year. I just noticed that only some of my category descriptions are showing up. Any ideas? I imagine this isn't good for sales. Thanks. Art
-
Hi Jack. The link shows up just below the text as a very thin blue bar. It's there, but you have to click on it to see it as it was meant to be seen. Not sure why. Thanks
-
It shows in the attached pic - you have to click on it to enlarge it - not sure why. Anyhow, I'm talking about links within the breadcrumb trail thanks
-
Hi Jack I am noticing in my breadcrumb trail duplicates and triplicates. How can I fix this? Thanks photo attached
-
There is a page featured_products.php. I don't recall if this was an add-on or came with stock OSC. Seems to have been there as long as I can remember. It's on a massively optimized shop from 2004, 2.2 I think.. thanks
-
Jack, I just noticed that featured products is not in the file list. Is there a reason for that or ?? I tried selecting add missing pages though that didn't help. I suspect for some reason that didn't get added to the database (it's not there) perhaps a glitch during the installation. Was that supposed to be pulled from the filenames.php file? Perhaps I should just add it manually to the db? - no big deal. Thanks..
-
OK, I think I've found what i need if you can just verify $tmpTags['prod_model'] = (tep_not_null($the_product_info['products_model'])) ? $the_product_info['products_model'] : ''; $tmpTags['prod_model'] = (substr($tmpTags['prod_model'],3)); That should do it, right? Seems to work as I need it to. You need not respond unless there are any other places that might need fixing.. Thanks Jack
-
OK, I messed around with the settins and think I have that part figured out now - tyvm. I would like to alter the model number though and not sure where to do this. My model numbers in the database are pre-pended with a 3 digit manufacturer code, but I need this stripped out. That I know how to do, but I need to know which file to change. Thanks..
-
Hi Jack. I must say this add-on has a lot of bells and whistles and it is hard for me as an old fart to figure it all out. I'll get there though. I did take to customizing some of the meta tags directly through my database interface. One thing I cannot figure out is why the model numbers are not showing up in the page titles. Can you point me in the right direction to fix this? Thaks..
-
Changed back to standard - works now Jack. Thank you so much. Once my site recovers from Panda, etc, I will be sending a contribution..
-
Hi Jack. I was wondering about that, and had checked my catalog/inc/con file as well to be safe. No luck there either. Here is that config file - maybe you can spot something I can't. Thanks again...: define('HTTP_SERVER','http://www.mysite.com'); define('HTTPS_SERVER', 'https://www.mysite.com'); define('ENABLE_SSL', true); // secure webserver for checkout procedure? define('HTTP_COOKIE_DOMAIN','www.mysite.com'); define('HTTPS_COOKIE_DOMAIN','www.mysite.com'); define('HTTP_COOKIE_PATH', '/'); define('HTTPS_COOKIE_PATH', '/'); define('HTTP_MAIL_DOMAIN', 'mysite.com'); define('DIR_WS_HTTP_CATALOG', '/'); define('DIR_WS_HTTPS_CATALOG', '/'); define('DIR_WS_IMAGES', 'images/'); define('DIR_WS_ICONS', DIR_WS_IMAGES . 'icons/'); define('DIR_WS_INCLUDES', 'includes/'); define('DIR_WS_BOXES',DIR_WS_INCLUDES . 'boxes/'); define('DIR_WS_FUNCTIONS', DIR_WS_INCLUDES . 'functions/'); define('DIR_WS_CLASSES', DIR_WS_INCLUDES . 'classes/'); define('DIR_WS_MODULES', DIR_WS_INCLUDES . 'modules/'); define('DIR_WS_LANGUAGES', DIR_WS_INCLUDES . 'languages/'); define('DIR_WS_DOWNLOAD_PUBLIC', 'pub/'); define('DIR_FS_CATALOG','/home/mysite/public_html/'); define('DIR_FS_DOWNLOAD',DIR_FS_CATALOG . 'download/'); define('DIR_FS_DOWNLOAD_PUBLIC',DIR_FS_CATALOG . 'pub/'); // define our database connection
-
Thanks for the response Jack, but I'm still having the same exact issue. Following is my config file from admin. There are a couple of lines which have been there forever, but I made some changes tonight based on your link and commented them out and replaced them. That did take care of a longstanding (as in forever) issue of backup directory warnings, but I never really used it so it wasn't an issue, and as far as I could ever tell never caused any issues otherwise. I do not know if that was how the original file was setup or some mod required a change - the shop has been up for going on nine years now. Not sure it would or should matter much since either version yields the same results. Anyhow, I get the sense that there may be a mixup between FS and WS somewhere. but since my site is fuctioning I suspect the problem is not in the config file at least. Any other ideas? Thanks again! // define our webserver variables // FS = Filesystem (physical) // WS = Webserver (virtual) define('HTTP_SERVER', 'https://www.mysite.com'); // eg, http://localhost or - https://localhost should not be NULL for productive servers define('HTTP_CATALOG_SERVER', 'http://www.mysite.com'); define('HTTPS_CATALOG_SERVER', 'https://www.mysite.com'); define('ENABLE_SSL_CATALOG', 'true'); // secure webserver for catalog module define('DIR_FS_DOCUMENT_ROOT', '/home/mysite/public_html/'); define('DIR_WS_ADMIN', '/admin/'); define('DIR_FS_ADMIN', '/home/mysite/public_html/admin/'); define('DIR_WS_CATALOG', '/'); define('DIR_FS_CATALOG', '/home/mysite/public_html/'); old line replaced tonight // define('DIR_FS_ADMIN', DIR_FS_DOCUMENT_ROOT . DIR_WS_CATALOG . '/admin/'); old line replaced tonight // define('DIR_FS_CATALOG', DIR_FS_DOCUMENT_ROOT . DIR_WS_CATALOG); define('DIR_WS_IMAGES', 'images/'); define('DIR_WS_FLAGS', DIR_WS_IMAGES . 'flags/'); define('DIR_WS_ICONS', DIR_WS_IMAGES . 'icons/'); define('DIR_WS_CATALOG_IMAGES', DIR_WS_CATALOG . 'images/'); define('DIR_WS_INCLUDES', 'includes/'); define('DIR_WS_BOXES', DIR_WS_INCLUDES . 'boxes/'); define('DIR_WS_FUNCTIONS', DIR_WS_INCLUDES . 'functions/'); define('DIR_WS_CLASSES', DIR_WS_INCLUDES . 'classes/'); define('DIR_WS_MODULES', DIR_WS_INCLUDES . 'modules/'); define('DIR_WS_LANGUAGES', DIR_WS_INCLUDES . 'languages/'); define('DIR_WS_CATALOG_LANGUAGES', DIR_WS_CATALOG . 'includes/languages/'); define('DIR_FS_CATALOG_LANGUAGES', DIR_FS_CATALOG . 'includes/languages/'); define('DIR_FS_CATALOG_IMAGES', DIR_FS_CATALOG . 'images/'); define('DIR_FS_CATALOG_MODULES', DIR_FS_CATALOG . 'includes/modules/'); define('DIR_FS_BACKUP', DIR_FS_ADMIN . 'backups/'); // define our database connection
-
Hi Jack I d/l the most recent version. After installing ran it in diagnostic mode, and this is what I get: Opening /sitemapproducts.xml FS_CAT /home/mysite/public_html/ Server http://www.mysite.com Save Path / WS_CAT / ERROR: Google Product Sitemap Generation FAILED! Opening /sitemapcategories.xml FS_CAT /home/mysite/public_html/ Server http://www.mysite.com Save Path / WS_CAT / ERROR: Google Category Sitemap Generation FAILED! Opening /sitemapindex.xml FS_CAT /home/mysite/public_html/ Server http://www.mysite.com Save Path / WS_CAT / ERROR: Google Sitemap Index Generation FAILED! Array ( [QUERY] => Array ( [PRODUCTS] => Array ( [sTATUS] => success [NUM_ROWS] => 1573 ) [CATEOGRY] => Array ( [sTATUS] => success [NUM_ROWS] => 145 ) ) [sAVE_FILE_XML] => Array ( [0] => Array ( [file] => /sitemapproducts.xml [status] => failure [file_exists] => false ) [1] => Array ( [file] => /sitemapcategories.xml [status] => failure [file_exists] => false ) [2] => Array ( [file] => /sitemapindex.xml [status] => failure [file_exists] => false ) ) ) instructions indicate there is supposed to be an install file but it is not in the zip that I have. Permissions are set correctly. Looks like something wrong with the paths. Can you steer me in the right direction please? running php 5.3.19 thanks
-
Jack, what would cause one or more of my files to not show up in the drop-down lists? I noticed 2 right off the bat that are missing. Thanks again 4 this super contribution..